Cura/resources/quality/ultimaker_s5/um_s5_aa0.8_tpu_0.4mm.inst.cfg

[general]
definition = ultimaker_s5
name = Sprint
version = 4

[metadata]
material = generic_tpu
quality_type = superdraft
setting_version = 23
type = quality
variant = AA 0.8
weight = -4

[values]
bridge_skin_material_flow = 200
bridge_skin_speed = =bridge_wall_speed
bridge_sparse_infill_max_density = 50
bridge_wall_material_flow = =bridge_skin_material_flow
bridge_wall_speed = 10
brim_width = 8.75
infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'cross_3d'
infill_sparse_density = 15
machine_nozzle_cool_down_speed = 0.5
machine_nozzle_heat_up_speed = 2.5
material_final_print_temperature = =material_print_temperature - 10
material_flow = 105
material_initial_print_temperature = =material_print_temperature - 10
multiple_mesh_overlap = 0.2
prime_tower_enable = True
prime_tower_flow = 100
retraction_count_max = 15
retraction_extra_prime_amount = 0.5
retraction_hop = 1.5
retraction_hop_only_when_collides = False
speed_infill = =speed_print
speed_print = 30
speed_topbottom = =math.ceil(speed_print * 20 / 30)
speed_wall = =speed_print
speed_wall_x = =speed_print
support_angle = 50
switch_extruder_prime_speed = 15
switch_extruder_retraction_amount = 20
switch_extruder_retraction_speeds = 45
top_bottom_thickness = =layer_height * 6
top_skin_expand_distance = =line_width * 2
travel_avoid_distance = 1.5
wall_0_wipe_dist = =line_width * 2