Cura/resources/quality/ultimaker3/um3_aa0.25_PP_Normal_Quality.inst.cfg

[general]
definition = ultimaker3
name = Fine - Experimental
version = 4

[metadata]
is_experimental = True
material = generic_pp
quality_type = normal
setting_version = 23
type = quality
variant = AA 0.25
weight = 0

[values]
brim_width = 10
infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'tetrahedral'
infill_wipe_dist = 0.1
machine_min_cool_heat_time_window = 15
material_final_print_temperature = =material_print_temperature - 10
material_initial_print_temperature = =material_print_temperature - 10
material_print_temperature = =default_material_print_temperature - 2
multiple_mesh_overlap = 0
prime_tower_enable = False
prime_tower_size = 16
prime_tower_wipe_enabled = True
retraction_count_max = 15
retraction_extra_prime_amount = 0.2
retraction_hop = 2
retraction_hop_only_when_collides = True
retraction_min_travel = 0.8
retraction_prime_speed = 13
speed_print = 25
speed_travel = 300
speed_wall = =math.ceil(speed_print * 25 / 25)
speed_wall_0 = =math.ceil(speed_wall * 25 / 25)
support_angle = 50
switch_extruder_prime_speed = 15
switch_extruder_retraction_amount = 20
switch_extruder_retraction_speeds = 35
top_bottom_thickness = 1
travel_avoid_distance = 3
wall_0_inset = 0