Cura/resources/quality/liquid/liquid_vo0.4_PETG_Fast_Print.inst.cfg

[general]
definition = liquid
name = Normal
version = 4

[metadata]
material = generic_petg
quality_type = fast
setting_version = 23
type = quality
variant = VO 0.4
weight = -1

[values]
cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
cool_fan_speed_max = =cool_fan_speed
infill_line_width = =round(line_width * 0.42 / 0.35, 2)
jerk_travel = 20
layer_height_0 = 0.2
machine_nozzle_cool_down_speed = 0.75
machine_nozzle_heat_up_speed = 1.6
material_standby_temperature = 100
prime_tower_enable = False
speed_layer_0 = =math.ceil(speed_print * 20 / 60)
speed_print = 60
speed_topbottom = =math.ceil(speed_print * 35 / 60)
speed_wall = =math.ceil(speed_print * 45 / 60)
speed_wall_0 = =math.ceil(speed_wall * 35 / 60)
top_bottom_thickness = 1
wall_thickness = 1