Cura/resources/quality/fusion3/fusion3_0.4_PETG_normal.inst.cfg

[general]
definition = fusion3
name = Normal Quality
version = 4

[metadata]
material = generic_petg
quality_type = normal
setting_version = 23
type = quality
variant = 0.4mm Nozzle

[values]
cool_fan_enabled = True
cool_fan_full_layer = 60
cool_fan_speed = 75
cool_fan_speed_min = 15
cool_min_layer_time = 4
cool_min_layer_time_fan_speed_max = 70
infill_overlap = 20
infill_sparse_density = 30
inset_direction = outside_in
layer_height_0 = 0.2
line_width = 0.4
material_bed_temperature = 65
material_flow = 97
material_flow_layer_0 = 97
material_print_temperature = 260
retract_at_layer_change = False
retraction_amount = 4.6
retraction_combing = noskin
retraction_combing_max_distance = 10
retraction_speed = 110
skirt_gap = 5
speed_print = 85
support_angle = 45
support_enable = True
support_infill_rate = 30
top_bottom_thickness = 0.6
wall_thickness = 0.8
xy_offset_layer_0 = -0.15
zig_zaggify_infill = True