| 123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124 |
- [general]
- definition = flsun_v400
- name = Normal
- version = 4
- [metadata]
- global_quality = True
- quality_type = normal
- setting_version = 23
- type = quality
- weight = -2
- [values]
- acceleration_enabled = True
- acceleration_print = 8000.0
- acceleration_topbottom = 6000.0
- acceleration_travel = 8000.0
- acceleration_wall = 5000.0
- adhesion_type = brim
- bridge_enable_more_layers = False
- bridge_settings_enabled = True
- bridge_skin_material_flow = 60
- bridge_skin_speed = 60
- bridge_skin_support_threshold = 50
- bridge_wall_material_flow = 100.0
- bridge_wall_speed = 60
- brim_width = 6.6
- cool_fan_full_at_height = 0.6
- cool_fan_speed = 100
- cool_lift_head = False
- cool_min_layer_time = 5
- expand_skins_expand_distance = 0.8
- fill_outline_gaps = False
- infill_before_walls = False
- infill_enable_travel_optimization = False
- infill_pattern = grid
- infill_sparse_density = 10.0
- infill_support_angle = 50
- inset_direction = inside_out
- ironing_enabled = False
- ironing_only_highest_layer = True
- jerk_enabled = True
- jerk_infill = 100.0
- jerk_layer_0 = 10.0
- jerk_print = 10.0
- jerk_roofing = 10.0
- jerk_support_interface = 10.0
- jerk_topbottom = 10.0
- jerk_travel = 100.0
- jerk_wall = 10.0
- jerk_wall_0 = 5.0
- layer_height = 0.2
- layer_height_0 = 0.3
- line_width = 0.44
- material_bed_temperature = 60
- material_bed_temperature_layer_0 = 60
- material_final_print_temperature = 210
- material_initial_print_temperature = 210
- material_print_temperature = 210
- material_print_temperature_layer_0 = 210
- max_skin_angle_for_expansion = 90
- minimum_interface_area = 2.0
- minimum_support_area = 2.0
- optimize_wall_printing_order = True
- raft_speed = 75.0
- retract_at_layer_change = False
- retraction_amount = 0.6
- retraction_combing = noskin
- retraction_combing_max_distance = 10
- retraction_hop = 0.3
- retraction_hop_enabled = True
- retraction_hop_only_when_collides = False
- retraction_speed = 40
- roofing_layer_count = 1
- skin_monotonic = True
- skin_no_small_gaps_heuristic = False
- skin_overlap = 10
- skin_preshrink = 0.8
- skirt_line_count = 2
- small_feature_speed_factor = 60.0
- small_hole_max_size = 5.0
- speed_infill = 350.0
- speed_layer_0 = 25
- speed_print = 400.0
- speed_roofing = 120.0
- speed_support = 350
- speed_support_interface = 100
- speed_topbottom = 120.0
- speed_travel = 400.0
- speed_travel_layer_0 = 50.0
- speed_wall = 120.0
- speed_wall_x = 280.0
- speed_z_hop = 50.0
- support_angle = 65
- support_brim_enable = True
- support_brim_width = 8.8
- support_enable = False
- support_infill_rate = 10
- support_interface_density = 70
- support_interface_enable = True
- support_interface_height = 0.6
- support_interface_pattern = lines
- support_pattern = zigzag
- support_roof_density = 70
- support_type = everywhere
- support_use_towers = False
- support_wall_count = 1
- support_xy_distance = 0.5
- support_xy_overrides_z = xy_overrides_z
- support_z_distance = 0.2
- top_bottom_thickness = 0.6
- top_layers = =0 if infill_sparse_density == 100 else math.ceil(round(top_thickness / resolveOrValue('layer_height'), 4))
- top_thickness = 1
- travel_avoid_other_parts = True
- travel_avoid_supports = True
- travel_retract_before_outer_wall = False
- wall_overhang_angle = 35.0
- wall_overhang_speed_factor = 60.0
- wall_thickness = =line_width*2
- z_seam_corner = z_seam_corner_inner
- z_seam_position = backright
- z_seam_type = sharpest_corner
- zig_zaggify_infill = True
|
