| 1234567891011121314151617181920212223242526272829303132333435363738394041424344454647484950515253545556575859606162636465666768697071727374 |
- [general]
- definition = dagoma_sigma_pro
- name = Normal
- version = 4
- [metadata]
- material = generic_pla
- quality_type = h0.2
- setting_version = 23
- type = quality
- variant = Brass 0.4mm
- weight = 1
- [values]
- adhesion_type = brim
- bridge_settings_enabled = True
- brim_width = 2
- coasting_enable = True
- coasting_volume = 0.06
- cool_fan_full_layer = 5
- cool_min_layer_time = 7
- cool_min_temperature = 195
- infill_material_flow = 105
- infill_sparse_density = 15
- material_final_print_temperature = 200
- material_flow_layer_0 = 100
- material_initial_print_temperature = 200
- material_print_temperature = 200
- material_print_temperature_layer_0 = 200
- material_standby_temperature = 195
- ooze_shield_enabled = False
- prime_tower_brim_enable = True
- prime_tower_enable = True
- prime_tower_min_volume = 44
- prime_tower_size = 25
- prime_tower_wipe_enabled = False
- retraction_amount = 3.0
- retraction_combing = infill
- retraction_hop = 0.4
- retraction_hop_after_extruder_switch_height = 0
- retraction_hop_enabled = True
- retraction_prime_speed = 45
- retraction_retract_speed = 60
- retraction_speed = 80
- smooth_spiralized_contours = False
- speed_infill = 80
- speed_layer_0 = 22
- speed_prime_tower = 70
- speed_print = 35
- speed_slowdown_layers = 3
- speed_topbottom = 35
- speed_travel = 180
- speed_travel_layer_0 = 70
- speed_wall_0 = 25
- speed_wall_x = 35.0
- speed_z_hop = 120
- support_enable = False
- support_structure = tree
- support_tree_angle = 55
- support_tree_top_rate = =30 if support_roof_enable else 10
- switch_extruder_extra_prime_amount = 0
- switch_extruder_prime_speed = 20
- switch_extruder_retraction_amount = 80
- switch_extruder_retraction_speed = =switch_extruder_retraction_speeds
- switch_extruder_retraction_speeds = 80
- travel_avoid_distance = 2.0
- travel_avoid_other_parts = False
- travel_avoid_supports = True
- wall_0_material_flow = =wall_material_flow
- wall_0_material_flow_layer_0 = 85
- wall_thickness = 1.2
- wall_transition_length = 0.4
- wall_x_material_flow_layer_0 = 90
|
