Cura/plugins/LegacyProfileReader/DictionaryOfDoom.json

{
    "source_version": "15.04",
    "target_version": "4.5",

    "translation": {
        "machine_nozzle_size": "nozzle_size",
        "line_width": "wall_thickness if (spiralize == \"True\" or simple_mode == \"True\") else (nozzle_size if (float(wall_thickness) < 0.01) else (wall_thickness if (float(wall_thickness) < float(nozzle_size)) else (nozzle_size if ((int(float(wall_thickness) / (float(nozzle_size) - 0.0001))) == 0) else ((float(wall_thickness) / ((int(float(wall_thickness) / (float(nozzle_size) - 0.0001))) + 1)) if ((float(wall_thickness) / (int(float(wall_thickness) / (float(nozzle_size) - 0.0001)))) > float(nozzle_size) * 1.5) else ((float(wall_thickness) / (int(float(wall_thickness) / (float(nozzle_size) - 0.0001)))))))))",
        "layer_height": "layer_height",
        "layer_height_0": "bottom_thickness",
        "wall_thickness": "wall_thickness",
        "top_thickness": "0 if (solid_top == \"False\") else solid_layer_thickness",
        "bottom_thickness": "0 if (solid_bottom == \"False\") else solid_layer_thickness",
        "infill_sparse_density": "fill_density",
        "infill_overlap": "fill_overlap",
        "infill_before_walls": "False if (perimeter_before_infill == \"True\") else True",
        "material_print_temperature": "print_temperature",
        "material_bed_temperature": "print_bed_temperature",
        "material_diameter": "filament_diameter",
        "material_flow": "filament_flow",
        "retraction_enable": "retraction_enable",
        "retraction_amount": "retraction_amount",
        "retraction_speed": "retraction_speed",
        "retraction_min_travel": "retraction_min_travel",
        "retraction_hop_enabled": "retraction_hop != 0",
        "speed_print": "print_speed",
        "speed_infill": "infill_speed if (float(infill_speed) != 0) else print_speed",
        "speed_wall_0": "inset0_speed if (float(inset0_speed) != 0) else print_speed",
        "speed_wall_x": "insetx_speed if (float(insetx_speed) != 0) else print_speed",
        "speed_topbottom": "solidarea_speed if (float(solidarea_speed) != 0) else print_speed",
        "speed_travel": "travel_speed if (float(travel_speed) != 0) else travel_speed",
        "speed_layer_0": "bottom_layer_speed",
        "retraction_combing": "\"all\" if retraction_combing == \"All\" else \"noskin\" if retraction_combing == \"No Skin\" else \"off\"",
        "cool_fan_enabled": "fan_enabled",
        "cool_fan_speed_min": "fan_speed",
        "cool_fan_speed_max": "fan_speed_max",
        "cool_fan_full_at_height": "fan_full_height",
        "cool_min_layer_time": "cool_min_layer_time",
        "cool_min_speed": "cool_min_feedrate",
        "cool_lift_head": "cool_head_lift",
        "support_enable": "False if (support == \"None\") else True",
        "support_type": "\"buildplate\" if (support == \"Touching buildplate\") else \"everywhere\"",
        "support_angle": "support_angle",
        "support_xy_distance": "support_xy_distance",
        "support_z_distance": "support_z_distance",
        "support_pattern": "support_type.lower()",
        "support_infill_rate": "support_fill_rate",
        "adhesion_type": "\"skirt\" if (platform_adhesion == \"None\") else platform_adhesion.lower()",
        "skirt_line_count": "skirt_line_count",
        "skirt_gap": "skirt_gap",
        "skirt_brim_minimal_length": "skirt_minimal_length",
        "brim_line_count": "brim_line_count",
        "raft_margin": "raft_margin",
        "raft_airgap": "float(raft_airgap_all) + float(raft_airgap)",
        "layer_0_z_overlap": "raft_airgap",
        "raft_surface_layers": "raft_surface_layers",
        "raft_surface_thickness": "raft_surface_thickness",
        "raft_surface_line_width": "raft_surface_linewidth",
        "raft_surface_line_spacing": "raft_line_spacing",
        "raft_interface_thickness": "raft_interface_thickness",
        "raft_interface_line_width": "raft_interface_linewidth",
        "raft_interface_line_spacing": "raft_line_spacing",
        "raft_base_thickness": "raft_base_thickness",
        "raft_base_line_width": "raft_base_linewidth",
        "raft_base_line_spacing": "raft_line_spacing",
        "meshfix_union_all": "fix_horrible_union_all_type_a",
        "meshfix_union_all_remove_holes": "fix_horrible_union_all_type_b",
        "meshfix_extensive_stitching": "fix_horrible_extensive_stitching",
        "meshfix_keep_open_polygons": "fix_horrible_use_open_bits",
        "magic_mesh_surface_mode": "\"surface\" if simple_mode else \"normal\"",
        "magic_spiralize": "spiralize",
        "prime_tower_enable": "wipe_tower",
        "prime_tower_size": "math.sqrt(float(wipe_tower_volume) / float(layer_height))",
        "ooze_shield_enabled": "ooze_shield",
        "skin_overlap": "fill_overlap"
    },

    "defaults": {
        "bottom_layer_speed":               "20",
        "bottom_thickness":                 "0.3",
        "brim_line_count":                  "20",
        "cool_head_lift":                   "False",
        "cool_min_feedrate":                "10",
        "cool_min_layer_time":              "5",
        "fan_enabled":                      "True",
        "fan_full_height":                  "0.5",
        "fan_speed":                        "100",
        "fan_speed_max":                    "100",
        "filament_diameter":                "2.85",
        "filament_diameter2":               "0",
        "filament_diameter3":               "0",
        "filament_diameter4":               "0",
        "filament_diameter5":               "0",
        "filament_flow":                    "100.0",
        "fill_density":                     "20",
        "fill_overlap":                     "15",
        "fix_horrible_extensive_stitching": "False",
        "fix_horrible_union_all_type_a":    "True",
        "fix_horrible_union_all_type_b":    "False",
        "fix_horrible_use_open_bits":       "False",
        "infill_speed":                     "0.0",
        "inset0_speed":                     "0.0",
        "insetx_speed":                     "0.0",
        "layer_height":                     "0.1",
        "layer0_width_factor":              "100",
        "nozzle_size":                      "0.4",
        "object_sink":                      "0.0",
        "ooze_shield":                      "False",
        "overlap_dual":                     "0.15",
        "perimeter_before_infill":          "False",
        "platform_adhesion":                "None",
        "print_bed_temperature":            "70",
        "print_speed":                      "50",
        "print_temperature":                "210",
        "print_temperature2":               "0",
        "print_temperature3":               "0",
        "print_temperature4":               "0",
        "print_temperature5":               "0",
        "raft_airgap":                      "0.22",
        "raft_airgap_all":                  "0.0",
        "raft_base_linewidth":              "1.0",
        "raft_base_thickness":              "0.3",
        "raft_interface_linewidth":         "0.4",
        "raft_interface_thickness":         "0.27",
        "raft_line_spacing":                "3.0",
        "raft_margin":                      "5.0",
        "raft_surface_layers":              "2",
        "raft_surface_linewidth":           "0.4",
        "raft_surface_thickness":           "0.27",
        "retraction_amount":                "4.5",
        "retraction_combing":               "All",
        "retraction_dual_amount":           "16.5",
        "retraction_enable":                "True",
        "retraction_hop":                   "0.0",
        "retraction_min_travel":            "1.5",
        "retraction_minimal_extrusion":     "0.02",
        "retraction_speed":                 "40.0",
        "simple_mode":                      "False",
        "skirt_gap":                        "3.0",
        "skirt_line_count":                 "1",
        "skirt_minimal_length":             "150.0",
        "solid_bottom":                     "True",
        "solid_layer_thickness":            "0.6",
        "solid_top":                        "True",
        "solidarea_speed":                  "0.0",
        "spiralize":                        "False",
        "support":                          "None",
        "support_angle":                    "60",
        "support_dual_extrusion":           "Both",
        "support_fill_rate":                "15",
        "support_type":                     "Lines",
        "support_xy_distance":              "0.7",
        "support_z_distance":               "0.15",
        "travel_speed":                     "150.0",
        "wall_thickness":                   "0.8",
        "wipe_tower":                       "False",
        "wipe_tower_volume":                "15"
    }
}