| 123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367368369370371372373374375376377378379380381382383384385386387388389390391392393394395396397398399400401402403404405406407408409410411412413414415416417418419420421 |
- [general]
- name = Expert
- weight = 3
- [machine_settings]
- [resolution]
- layer_height
- layer_height_0
- line_width
- wall_line_width
- wall_line_width_0
- wall_line_width_x
- skin_line_width
- infill_line_width
- skirt_brim_line_width
- support_line_width
- support_interface_line_width
- support_roof_line_width
- support_bottom_line_width
- prime_tower_line_width
- initial_layer_line_width_factor
- [shell]
- wall_extruder_nr
- wall_0_extruder_nr
- wall_x_extruder_nr
- wall_thickness
- wall_line_count
- wall_0_wipe_dist
- roofing_layer_count
- top_bottom_extruder_nr
- top_bottom_thickness
- top_thickness
- top_layers
- bottom_thickness
- bottom_layers
- top_bottom_pattern
- top_bottom_pattern_0
- connect_skin_polygons
- skin_angles
- wall_0_inset
- optimize_wall_printing_order
- outer_inset_first
- alternate_extra_perimeter
- travel_compensate_overlapping_walls_enabled
- travel_compensate_overlapping_walls_0_enabled
- travel_compensate_overlapping_walls_x_enabled
- fill_perimeter_gaps
- filter_out_tiny_gaps
- fill_outline_gaps
- xy_offset
- xy_offset_layer_0
- hole_xy_offset
- z_seam_type
- z_seam_position
- z_seam_x
- z_seam_y
- z_seam_corner
- z_seam_relative
- skin_no_small_gaps_heuristic
- skin_outline_count
- ironing_enabled
- ironing_only_highest_layer
- ironing_pattern
- ironing_line_spacing
- ironing_flow
- ironing_inset
- speed_ironing
- acceleration_ironing
- jerk_ironing
- skin_overlap
- skin_overlap_mm
- [infill]
- infill_extruder_nr
- infill_sparse_density
- infill_line_distance
- infill_pattern
- zig_zaggify_infill
- connect_infill_polygons
- infill_multiplier
- infill_angles
- infill_offset_x
- infill_offset_y
- sub_div_rad_add
- infill_overlap
- infill_overlap_mm
- infill_wipe_dist
- infill_sparse_thickness
- gradual_infill_steps
- gradual_infill_step_height
- infill_before_walls
- min_infill_area
- infill_support_enabled
- skin_preshrink
- top_skin_preshrink
- bottom_skin_preshrink
- expand_skins_expand_distance
- top_skin_expand_distance
- bottom_skin_expand_distance
- max_skin_angle_for_expansion
- min_skin_width_for_expansion
- infill_randomize_start_location
- skin_edge_support_thickness
- skin_edge_support_layers
- [material]
- default_material_print_temperature
- material_print_temperature
- material_print_temperature_layer_0
- material_initial_print_temperature
- material_final_print_temperature
- material_extrusion_cool_down_speed
- default_material_bed_temperature
- material_bed_temperature
- material_bed_temperature_layer_0
- material_adhesion_tendency
- material_surface_energy
- material_flow
- wall_material_flow
- wall_0_material_flow
- wall_x_material_flow
- skin_material_flow
- roofing_material_flow
- infill_material_flow
- skirt_brim_material_flow
- support_material_flow
- support_interface_material_flow
- support_roof_material_flow
- support_bottom_material_flow
- prime_tower_flow
- material_flow_layer_0
- material_standby_temperature
- [speed]
- speed_print
- speed_infill
- speed_wall
- speed_wall_0
- speed_wall_x
- speed_roofing
- speed_topbottom
- speed_support
- speed_support_infill
- speed_support_interface
- speed_prime_tower
- speed_travel
- speed_layer_0
- speed_print_layer_0
- speed_travel_layer_0
- skirt_brim_speed
- speed_slowdown_layers
- speed_equalize_flow_enabled
- speed_equalize_flow_max
- acceleration_enabled
- acceleration_print
- acceleration_infill
- acceleration_wall
- acceleration_wall_0
- acceleration_wall_x
- acceleration_roofing
- acceleration_topbottom
- acceleration_support
- acceleration_support_infill
- acceleration_support_interface
- acceleration_prime_tower
- acceleration_travel
- acceleration_layer_0
- acceleration_print_layer_0
- acceleration_travel_layer_0
- acceleration_skirt_brim
- jerk_enabled
- jerk_print
- jerk_infill
- jerk_wall
- jerk_wall_0
- jerk_wall_x
- jerk_roofing
- jerk_topbottom
- jerk_support
- jerk_support_infill
- jerk_support_interface
- jerk_prime_tower
- jerk_travel
- jerk_layer_0
- jerk_print_layer_0
- jerk_travel_layer_0
- jerk_skirt_brim
- [travel]
- retraction_combing
- travel_retract_before_outer_wall
- travel_avoid_other_parts
- travel_avoid_supports
- travel_avoid_distance
- layer_start_x
- layer_start_y
- retraction_min_travel
- retraction_hop_enabled
- retraction_hop_only_when_collides
- retraction_hop
- retraction_hop_after_extruder_switch
- retraction_hop_after_extruder_switch_height
- retraction_enable
- retract_at_layer_change
- retraction_amount
- retraction_speed
- retraction_retract_speed
- retraction_prime_speed
- retraction_extra_prime_amount
- retraction_count_max
- retraction_extrusion_window
- switch_extruder_retraction_amount
- switch_extruder_retraction_speeds
- switch_extruder_retraction_speed
- switch_extruder_prime_speed
- [cooling]
- cool_fan_enabled
- cool_fan_speed
- cool_fan_speed_min
- cool_fan_speed_max
- cool_min_layer_time_fan_speed_max
- cool_fan_speed_0
- cool_fan_full_at_height
- cool_fan_full_layer
- cool_min_layer_time
- cool_min_speed
- cool_lift_head
- [support]
- support_enable
- support_extruder_nr
- support_infill_extruder_nr
- support_extruder_nr_layer_0
- support_interface_extruder_nr
- support_roof_extruder_nr
- support_bottom_extruder_nr
- support_type
- support_angle
- support_pattern
- support_wall_count
- zig_zaggify_support
- support_connect_zigzags
- support_infill_rate
- support_line_distance
- support_initial_layer_line_distance
- support_z_distance
- support_top_distance
- support_bottom_distance
- support_xy_distance
- support_xy_overrides_z
- support_xy_distance_overhang
- support_bottom_stair_step_height
- support_bottom_stair_step_width
- support_join_distance
- support_offset
- support_infill_sparse_thickness
- gradual_support_infill_steps
- gradual_support_infill_step_height
- min_supporting_model_area
- minimum_support_area
- support_interface_enable
- support_roof_enable
- support_bottom_enable
- support_interface_height
- support_roof_height
- support_bottom_height
- support_interface_skip_height
- support_interface_density
- support_roof_density
- support_bottom_density
- support_interface_pattern
- minimum_interface_area
- support_use_towers
- support_tower_diameter
- support_tower_maximum_supported_diameter
- support_tower_roof_angle
- support_mesh_drop_down
- [platform_adhesion]
- prime_blob_enable
- adhesion_type
- adhesion_extruder_nr
- skirt_line_count
- skirt_gap
- skirt_brim_minimal_length
- brim_width
- brim_gap
- brim_line_count
- brim_outside_only
- raft_margin
- raft_smoothing
- raft_airgap
- raft_surface_layers
- raft_surface_thickness
- raft_surface_line_width
- raft_surface_line_spacing
- raft_interface_thickness
- raft_interface_line_width
- raft_interface_line_spacing
- raft_base_thickness
- raft_base_line_width
- raft_base_line_spacing
- raft_speed
- raft_acceleration
- raft_jerk
- raft_fan_speed
- [dual]
- prime_tower_enable
- prime_tower_size
- prime_tower_min_volume
- prime_tower_position_x
- prime_tower_position_y
- prime_tower_wipe_enabled
- prime_tower_brim_enable
- ooze_shield_enabled
- ooze_shield_angle
- ooze_shield_dist
- [meshfix]
- meshfix_union_all
- meshfix_union_all_remove_holes
- meshfix_extensive_stitching
- meshfix_keep_open_polygons
- meshfix_maximum_resolution
- meshfix_maximum_travel_resolution
- meshfix_maximum_deviation
- multiple_mesh_overlap
- carve_multiple_volumes
- alternate_carve_order
- remove_empty_first_layers
- [blackmagic]
- print_sequence
- infill_mesh
- infill_mesh_order
- cutting_mesh
- mold_enabled
- mold_width
- mold_roof_height
- mold_angle
- support_mesh
- anti_overhang_mesh
- magic_mesh_surface_mode
- magic_spiralize
- smooth_spiralized_contours
- relative_extrusion
- [experimental]
- support_tree_enable
- support_tree_angle
- support_tree_branch_distance
- support_tree_branch_diameter
- support_tree_branch_diameter_angle
- support_tree_collision_resolution
- support_tree_wall_thickness
- support_tree_wall_count
- slicing_tolerance
- roofing_line_width
- roofing_pattern
- roofing_angles
- infill_enable_travel_optimization
- material_flow_dependent_temperature
- material_flow_temp_graph
- support_skip_some_zags
- support_skip_zag_per_mm
- support_zag_skip_count
- draft_shield_enabled
- draft_shield_dist
- draft_shield_height_limitation
- draft_shield_height
- conical_overhang_enabled
- conical_overhang_angle
- coasting_enable
- coasting_volume
- coasting_min_volume
- coasting_speed
- cross_infill_pocket_size
- spaghetti_infill_enabled
- spaghetti_infill_stepped
- spaghetti_max_infill_angle
- spaghetti_max_height
- spaghetti_inset
- spaghetti_flow
- spaghetti_infill_extra_volume
- support_conical_enabled
- support_conical_angle
- support_conical_min_width
- magic_fuzzy_skin_enabled
- magic_fuzzy_skin_outside_only
- magic_fuzzy_skin_thickness
- magic_fuzzy_skin_point_density
- magic_fuzzy_skin_point_dist
- flow_rate_max_extrusion_offset
- flow_rate_extrusion_offset_factor
- adaptive_layer_height_enabled
- adaptive_layer_height_variation
- adaptive_layer_height_variation_step
- adaptive_layer_height_threshold
- clean_between_layers
- max_extrusion_before_wipe
- wipe_retraction_enable
- wipe_retraction_amount
- wipe_retraction_extra_prime_amount
- wipe_retraction_speed
- wipe_retraction_retract_speed
- wipe_retraction_prime_speed
- wipe_pause
- wipe_hop_enable
- wipe_hop_amount
- wipe_hop_speed
- wipe_brush_pos_x
- wipe_repeat_count
- wipe_move_distance
- small_hole_max_size
- small_feature_max_length
- small_feature_speed_factor
- small_feature_speed_factor_0
|
