advanced.cfg 2.3 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140
  1. [general]
  2. name = Advanced
  3. weight = 2
  4. [machine_settings]
  5. [resolution]
  6. layer_height
  7. layer_height_0
  8. line_width
  9. wall_line_width
  10. wall_line_width_0
  11. wall_line_width_x
  12. skin_line_width
  13. infill_line_width
  14. initial_layer_line_width_factor
  15. [shell]
  16. wall_extruder_nr
  17. wall_0_extruder_nr
  18. wall_x_extruder_nr
  19. wall_thickness
  20. wall_line_count
  21. top_bottom_extruder_nr
  22. top_bottom_thickness
  23. top_thickness
  24. top_layers
  25. bottom_thickness
  26. bottom_layers
  27. optimize_wall_printing_order
  28. fill_perimeter_gaps
  29. xy_offset
  30. ironing_enabled
  31. [infill]
  32. infill_extruder_nr
  33. infill_sparse_density
  34. infill_line_distance
  35. infill_pattern
  36. infill_multiplier
  37. infill_overlap
  38. infill_sparse_thickness
  39. gradual_infill_steps
  40. [material]
  41. material_print_temperature
  42. material_print_temperature_layer_0
  43. material_initial_print_temperature
  44. material_final_print_temperature
  45. material_bed_temperature
  46. material_bed_temperature_layer_0
  47. retraction_enable
  48. retract_at_layer_change
  49. retraction_amount
  50. retraction_speed
  51. material_standby_temperature
  52. [speed]
  53. speed_print
  54. speed_infill
  55. speed_wall
  56. speed_wall_0
  57. speed_wall_x
  58. speed_topbottom
  59. speed_support
  60. speed_prime_tower
  61. speed_travel
  62. speed_layer_0
  63. skirt_brim_speed
  64. acceleration_enabled
  65. jerk_enabled
  66. [travel]
  67. retraction_combing
  68. travel_avoid_other_parts
  69. travel_avoid_supports
  70. travel_avoid_distance
  71. retraction_hop_enabled
  72. retraction_hop_only_when_collides
  73. retraction_hop
  74. retraction_hop_after_extruder_switch
  75. [cooling]
  76. cool_fan_enabled
  77. cool_fan_speed
  78. cool_fan_speed_min
  79. cool_fan_speed_max
  80. cool_min_layer_time_fan_speed_max
  81. cool_fan_speed_0
  82. cool_fan_full_at_height
  83. cool_fan_full_layer
  84. cool_min_layer_time
  85. cool_min_speed
  86. cool_lift_head
  87. [support]
  88. support_enable
  89. support_extruder_nr
  90. support_infill_extruder_nr
  91. support_extruder_nr_layer_0
  92. support_interface_extruder_nr
  93. support_type
  94. support_angle
  95. support_pattern
  96. support_infill_rate
  97. support_offset
  98. support_infill_sparse_thickness
  99. gradual_support_infill_steps
  100. gradual_support_infill_step_height
  101. support_interface_enable
  102. support_roof_enable
  103. support_bottom_enable
  104. [platform_adhesion]
  105. prime_blob_enable
  106. adhesion_type
  107. adhesion_extruder_nr
  108. skirt_line_count
  109. brim_width
  110. brim_line_count
  111. brim_outside_only
  112. [dual]
  113. prime_tower_enable
  114. prime_tower_position_x
  115. prime_tower_position_y
  116. prime_tower_brim_enable
  117. [meshfix]
  118. [blackmagic]
  119. print_sequence
  120. magic_mesh_surface_mode
  121. magic_spiralize
  122. smooth_spiralized_contours
  123. [experimental]
  124. conical_overhang_enabled
  125. support_conical_enabled
  126. adaptive_layer_height_enabled