12345678910111213141516171819202122232425262728293031323334353637383940414243 |
- [general]
- version = 4
- name = Extra Fast
- definition = ultimaker3
- [metadata]
- setting_version = 11
- type = quality
- quality_type = verydraft
- weight = -3
- material = generic_pla
- variant = AA 0.8
- [values]
- cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
- cool_fan_speed_max = =100
- cool_min_speed = 2
- gradual_infill_step_height = =3 * layer_height
- infill_line_width = =round(line_width * 0.65 / 0.75, 2)
- infill_pattern = triangles
- layer_height = 0.3
- line_width = =machine_nozzle_size * 0.9375
- machine_nozzle_cool_down_speed = 0.75
- machine_nozzle_heat_up_speed = 1.6
- material_final_print_temperature = =max(-273.15, material_print_temperature - 15)
- material_initial_print_temperature = =max(-273.15, material_print_temperature - 10)
- material_print_temperature = =default_material_print_temperature + 10
- material_standby_temperature = 100
- prime_tower_enable = True
- retract_at_layer_change = False
- speed_print = 45
- speed_topbottom = =math.ceil(speed_print * 35 / 45)
- speed_wall = =math.ceil(speed_print * 40 / 45)
- speed_wall_x = =speed_wall
- speed_wall_0 = =math.ceil(speed_wall * 35 / 40)
- support_angle = 70
- support_line_width = =line_width * 0.75
- support_pattern = ='triangles'
- support_xy_distance = =wall_line_width_0 * 1.5
- top_bottom_thickness = =layer_height * 4
- wall_line_width = =round(line_width * 0.75 / 0.75, 2)
- wall_line_width_x = =round(wall_line_width * 0.625 / 0.75, 2)
- wall_thickness = =wall_line_width_0 + wall_line_width_x
|