Cura/resources/quality/ultimaker2_plus/um2p_nylon_0.4_normal.inst.cfg

[general]
version = 4
name = Fine
definition = ultimaker2_plus

[metadata]
setting_version = 11
type = quality
quality_type = fast
weight = 0
material = generic_nylon
variant = 0.4 mm

[values]
adhesion_type = raft
cool_fan_speed_min = =cool_fan_speed * 0.35
cool_min_layer_time = 3
cool_min_speed = 15
infill_overlap = 5
infill_sparse_density = 30
layer_0_z_overlap = 0.22
raft_airgap = 0.57
raft_base_line_spacing = 1.6
raft_base_line_width = 0.8
raft_interface_line_spacing = 1
raft_interface_line_width = 0.8
raft_margin = 15
raft_surface_line_width = 0.5
raft_surface_thickness = 0.15
speed_layer_0 = =math.ceil(speed_print * 30 / 45)
speed_print = 45
speed_travel = 150
speed_wall = =math.ceil(speed_print * 40 / 45)
support_angle = 45
support_enable = True
support_infill_rate = =25 if support_enable else 0 if support_tree_enable else 25
support_pattern = lines
support_xy_distance = 0.6
support_z_distance = =layer_height * 2
top_bottom_thickness = 0.75
wall_thickness = 1.06