Cura/resources/definitions/strateo3d.def.json

{
    "version": 2,
    "name": "Strateo3D",
    "inherits": "fdmprinter",
    "metadata":
        {
            "author": "M.K",
            "manufacturer": "eMotionTech",
            "category": "Other",
            "visible": true,
            "file_formats": "text/x-gcode",
            "has_machine_quality": true,
            "has_materials": true,
            "has_variants": true,
            "preferred_variant_name": "Standard 0.6",
            "preferred_material": "emotiontech_pla",
            "preferred_quality_type": "c",
            "variants_name": "Print Head",
            "machine_extruder_trains": 
                { 
                    "0": "strateo3d_right_extruder", 
                    "1": "strateo3d_left_extruder"
                }
        },
        
    "overrides": 
        {
            "machine_name": { "default_value": "Strateo3D" },
            "machine_width": { "default_value": 600 },
            "machine_depth": { "default_value": 420 },
            "machine_height": { "default_value": 495 },
            "machine_heated_bed": { "default_value": true },
            "machine_heated_build_volume": { "default_value": true },
            "machine_center_is_zero": { "default_value": false },
            "machine_head_with_fans_polygon": { "default_value": [ [ -76, -51.8 ] , [ 25, -51.8 ] , [ 25, 38.2 ] , [ -76, 38.2 ] ] },
            "gantry_height": { "value": "40" },
            "machine_extruder_count": { "default_value": 2 },
            "machine_gcode_flavor": { "default_value": "Marlin" },
            "machine_start_gcode": { "default_value": "G28 \nG90 G1 X300 Y210 Z15 F6000 \nG92 E0" },
            "machine_end_gcode": { "default_value": "T1 \nM104 S0 \nT0 \nM104 S0 \nM140 S0 \nM141 S0 \nG91 \nG0 z1 \nG90 \nG28 \nM801.0 \nM84 \nM192" },
            "extruder_prime_pos_y": {"minimum_value": "0", "maximum_value": "machine_depth"},
            "extruder_prime_pos_x": {"minimum_value": "0", "maximum_value": "machine_width"},
            "machine_heat_zone_length": { "default_value": 7 },
            "default_material_print_temperature": { "maximum_value_warning": "350" },
            "material_print_temperature": { "maximum_value_warning": "350" },
            "material_print_temperature_layer_0": { "maximum_value_warning": "350" },
            "material_bed_temperature": { "maximum_value": "130" },
            "material_bed_temperature_layer_0": { "maximum_value": "130" },
            "extruder_prime_pos_abs": { "default_value": true },
            "machine_acceleration": { "default_value": 1500 },

            "acceleration_enabled": { "value": false },
            "acceleration_print": { "value": "machine_acceleration" },
            "acceleration_wall": { "value": "math.ceil(acceleration_print * 1250 / acceleration_print)" },
            "acceleration_wall_0": { "value": "math.ceil(acceleration_print * 1000 / acceleration_print)" },
            "acceleration_topbottom": { "value": "math.ceil(acceleration_print * 1250 / acceleration_print)" },
            "acceleration_support": { "value": "acceleration_print" },
            "acceleration_support_interface": { "value": "acceleration_topbottom" },
            "acceleration_travel": { "value": "acceleration_print" },
            "acceleration_layer_0": { "value": "acceleration_topbottom" },
            "adaptive_layer_height_variation": { "default_value": 0.1 },
            "adaptive_layer_height_variation_step": { "default_value": 0.05 },
            "adhesion_type": { "default_value": "skirt" },
            "expand_skins_expand_distance": { "value": "wall_line_width_0 + wall_line_count * wall_line_width_x" },
            "gradual_infill_step_height": { "value": "layer_height*10" },
            "gradual_support_infill_step_height": { "value": "layer_height*7" },
            "infill_before_walls": { "default_value": false },
            "infill_overlap": { "value": "0" },
            "infill_wipe_dist": { "value": "0" },
            "jerk_enabled": { "value": "False" },
            "jerk_layer_0": { "value": "jerk_topbottom" },
            "jerk_prime_tower": { "value": "math.ceil(jerk_print * 15 / 25)" },
            "jerk_print": { "value": "25" },
            "jerk_support": { "value": "math.ceil(jerk_print * 15 / 25)" },
            "jerk_support_interface": { "value": "jerk_topbottom" },
            "jerk_topbottom": { "value": "math.ceil(jerk_print * 5 / 25)" },
            "jerk_wall": { "value": "math.ceil(jerk_print * 10 / 25)" },
            "jerk_wall_0": { "value": "math.ceil(jerk_wall * 5 / 10)" },
            "layer_start_x": { "value": "sum(extruderValues('machine_extruder_start_pos_x')) / len(extruderValues('machine_extruder_start_pos_x'))" },
            "layer_start_y": { "value": "sum(extruderValues('machine_extruder_start_pos_y')) / len(extruderValues('machine_extruder_start_pos_y'))" },
            "machine_min_cool_heat_time_window": { "value": "15" },
            "machine_nozzle_cool_down_speed": { "default_value": 0.50 },
            "machine_nozzle_heat_up_speed": { "default_value": 2.25 },
            "material_final_print_temperature": { "value": "material_print_temperature - 10" },
            "material_flow": { "default_value": 93 },
            "material_flow_layer_0": { "value": "math.ceil(material_flow*1)" },
            "material_initial_print_temperature": { "value": "material_print_temperature - 5" },
            "meshfix_maximum_resolution": { "value": "0.03" },
            "optimize_wall_printing_order": { "value": "True" },
            "prime_blob_enable": { "enabled": false, "default_value": false },
            "prime_tower_min_volume": { "default_value": 35 },
            "prime_tower_position_x": { "value": "machine_width/2 - max(extruderValue(adhesion_extruder_nr, 'brim_width') * extruderValue(adhesion_extruder_nr, 'initial_layer_line_width_factor') / 100 if adhesion_type == 'brim' else (extruderValue(adhesion_extruder_nr, 'raft_margin') if adhesion_type == 'raft' else (extruderValue(adhesion_extruder_nr, 'skirt_gap') if adhesion_type == 'skirt' else 0)), max(extruderValues('travel_avoid_distance'))) - max(extruderValues('support_offset')) - sum(extruderValues('skirt_brim_line_width')) * extruderValue(adhesion_extruder_nr, 'initial_layer_line_width_factor') / 100 - (resolveOrValue('draft_shield_dist') if resolveOrValue('draft_shield_enabled') else 0) - 1" },
            "prime_tower_position_y": { "value": "machine_depth - prime_tower_size - max(extruderValue(adhesion_extruder_nr, 'brim_width') * extruderValue(adhesion_extruder_nr, 'initial_layer_line_width_factor') / 100 if adhesion_type == 'brim' else (extruderValue(adhesion_extruder_nr, 'raft_margin') if adhesion_type == 'raft' else (extruderValue(adhesion_extruder_nr, 'skirt_gap') if adhesion_type == 'skirt' else 0)), max(extruderValues('travel_avoid_distance'))) - max(extruderValues('support_offset')) - sum(extruderValues('skirt_brim_line_width')) * extruderValue(adhesion_extruder_nr, 'initial_layer_line_width_factor') / 100 - (resolveOrValue('draft_shield_dist') if resolveOrValue('draft_shield_enabled') else 0) - 1" },
            "retraction_amount": { "default_value": 1.5 },
            "retraction_combing": { "default_value": "all" },
            "retraction_combing_max_distance": { "default_value": 5 },
            "retraction_count_max": { "default_value": 15 },
            "retraction_hop": { "value": "2" },
            "retraction_hop_enabled": { "value": "extruders_enabled_count > 1"  },
            "retraction_hop_only_when_collides": { "value": "True" },
            "retraction_min_travel": { "value": "3*line_width" },
            "retraction_prime_speed": { "value": "retraction_speed-10" },
            "retraction_speed": { "default_value": 25 },
            "skin_overlap": { "value": "10" },
            "skirt_brim_minimal_length": { "default_value": 333 },
            "speed_layer_0": { "value": "20" },
            "speed_travel_layer_0": { "value": "100" },
            "speed_prime_tower": { "value": "speed_topbottom" },
            "speed_print": { "value": "50" },
            "speed_support": { "value": "speed_wall" },
            "speed_support_interface": { "value": "speed_topbottom" },
            "speed_topbottom": { "value": "math.ceil(speed_print * 20/35)" },
            "speed_travel": { "value": "150" },
            "speed_wall": { "value": "math.ceil(speed_print * 3/4)" },
            "speed_wall_0": { "value": "math.ceil(speed_wall * 2/3)" },
            "speed_wall_x": { "value": "speed_wall" },
            "support_angle": { "value": "50" },
            "support_bottom_distance": {"value": "extruderValue(support_bottom_extruder_nr if support_bottom_enable else support_infill_extruder_nr, 'support_z_distance/2') if support_type == 'everywhere' else 0", "maximum_value_warning": "machine_nozzle_size*1.5" },
            "support_interface_enable": { "default_value": true },
            "support_interface_height": { "value": "layer_height*3" },
            "support_interface_offset": { "value": "support_offset" },
            "support_top_distance": {"value": "extruderValue(support_roof_extruder_nr if support_roof_enable else support_infill_extruder_nr, 'support_z_distance')", "maximum_value_warning": "machine_nozzle_size*1.5" },
            "support_use_towers": { "default_value": true },
            "support_xy_distance": { "value": "line_width * 1.7" },
            "support_xy_distance_overhang": { "value": "wall_line_width_0" },
            "support_z_distance": { "value": "layer_height*2", "maximum_value_warning": "machine_nozzle_size*1.5" },
            "switch_extruder_prime_speed": { "value": "retraction_prime_speed" },
            "switch_extruder_retraction_amount": { "value": "7" },
            "switch_extruder_retraction_speeds": {"value": "retraction_retract_speed"},
            "top_bottom_thickness": { "value": "3*layer_height", "minimum_value_warning": "layer_height*2" },
            "top_thickness": { "value": "top_bottom_thickness" },
            "top_layers": { "value": "0 if infill_sparse_density == 100 else math.ceil(round(top_thickness / resolveOrValue('layer_height'), 4))"},
            "bottom_thickness": { "value": "top_bottom_thickness-2*layer_height+layer_height_0" },
            "bottom_layers": { "value": "999999 if infill_sparse_density == 100 else math.ceil(round(((bottom_thickness-resolveOrValue('layer_height_0')) / resolveOrValue('layer_height'))+1, 4))"},
            "travel_avoid_distance": { "value": "3 if extruders_enabled_count > 1 else machine_nozzle_tip_outer_diameter / 2 * 1.5" },
            "wall_thickness": { "value": "wall_line_width_0 + wall_line_width_x" }
        }
}