| 1234567891011121314151617181920212223242526272829303132333435363738394041 |
- {
- "version": 2,
- "name": "Hello BEE Prusa",
- "inherits": "fdmprinter",
- "metadata": {
- "visible": true,
- "author": "BEEVERYCREATIVE",
- "manufacturer": "BEEVERYCREATIVE",
- "platform": "BEEVERYCREATIVE-helloBEEprusa.stl",
- "platform_offset": [-226, -75, -196],
- "file_formats": "text/x-gcode",
- "machine_extruder_trains":
- {
- "0": "hBp_extruder_left",
- "1": "hBp_extruder_right"
- }
- },
- "overrides": {
- "machine_extruder_count": { "default_value": 2 },
- "machine_name": { "default_value": "hello BEE prusa" },
- "machine_start_gcode": { "default_value": "; -- START GCODE --\nG21 ;set units to millimetres\nG90 ;set to absolute positioning\nM107 ;set fan speed to zero (turned off)\nG28 X0 Y0 ;move to the X/Y origin (Home)\nG28 Z0 ;move to the Z origin (Home)\nG92 E0 ;zero the extruded length\nG1 F3600 ;set feedrate to 60 mm/sec\nM420 S1 \n; -- end of START GCODE --" },
- "machine_end_gcode": { "default_value": "; -- END GCODE --\nM104 S0 ;set extruder temperature to zero (turned off)\nM140 S0 ;set bed temperature to zero (turned off)\nG28 X0 Y0 ;move to the X/Y origin (Home)\nM84 ;turn off steppers\n; -- end of END GCODE --" },
- "machine_width": { "default_value": 185 },
- "machine_depth": { "default_value": 200 },
- "machine_height": { "default_value": 190 },
- "machine_heated_bed": { "default_value": true },
- "machine_center_is_zero": { "default_value": false },
- "layer_height": { "default_value": 0.2 },
- "layer_height_0": { "default_value": 0.2 },
- "wall_thickness": { "default_value": 1.2 },
- "top_bottom_thickness": { "default_value": 1.2 },
- "infill_sparse_density": { "default_value": 20 },
- "speed_print": { "default_value": 60 },
- "skirt_line_count": { "default_value": 4 },
- "skirt_brim_minimal_length": { "default_value": 30 },
- "skirt_gap": { "default_value": 6 },
- "retraction_speed": { "default_value": 15.0},
- "retraction_amount": { "default_value": 1.5}
- }
- }
|
