Cura/resources/variants/strateo3d/strateo3d_high_temp_04.inst.cfg

[general]
definition = strateo3d
name = High temp 0.4
version = 4

[metadata]
hardware_type = nozzle
setting_version = 23
type = variant

[values]
layer_height = 0.2
layer_height_0 = 0.3
machine_nozzle_id = HT0.4
machine_nozzle_size = 0.4
machine_nozzle_tip_outer_diameter = 1.0
prime_tower_enable = True
retract_at_layer_change = False
support_angle = 45
support_use_towers = True