Cura/resources/variants/dagoma/dagoma_pro_430_bowden_brass_1.0.inst.cfg

[general]
definition = dagoma_pro_430_bowden
name = Brass 1.0mm
version = 4

[metadata]
hardware_type = nozzle
setting_version = 23
type = variant

[values]
adhesion_type = none
bridge_settings_enabled = True
bridge_wall_material_flow = 60
bridge_wall_speed = 30
gradual_infill_step_height = 2
gradual_infill_steps = 0
infill_before_walls = False
infill_overlap = 5
infill_sparse_density = 7
initial_layer_line_width_factor = 100
inset_direction = inside_out
jerk_enabled = True
jerk_infill = 10
layer_height_0 = 0.3
line_width = 0.9
machine_nozzle_id = Brass 1.0mm
machine_nozzle_size = 1.0
material_print_temperature_layer_0 = =default_material_print_temperature + 25
retraction_speed = 30
roofing_layer_count = 1
roofing_material_flow = =skin_material_flow
speed_infill = 35
speed_topbottom = =speed_print / 2
speed_wall_x = 40
top_layers = 4
travel_avoid_supports = True
wall_line_count = 2
z_seam_corner = z_seam_corner_none
z_seam_position = backleft
z_seam_type = sharpest_corner