um_s5_aa0.4_tough-pla_0.3mm.inst.cfg 993 B

123456789101112131415161718192021222324252627282930313233343536
  1. [general]
  2. definition = ultimaker_s5
  3. name = Extra Fast - Experimental
  4. version = 4
  5. [metadata]
  6. is_experimental = True
  7. material = generic_tough_pla
  8. quality_type = verydraft
  9. setting_version = 23
  10. type = quality
  11. variant = AA 0.4
  12. weight = -3
  13. [values]
  14. acceleration_print = 2000
  15. acceleration_topbottom = 1000
  16. acceleration_wall = 1500
  17. acceleration_wall_0 = 1000
  18. infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles'
  19. infill_sparse_density = 15
  20. machine_nozzle_cool_down_speed = 0.75
  21. machine_nozzle_heat_up_speed = 1.6
  22. material_print_temperature = =default_material_print_temperature + 5
  23. prime_tower_enable = False
  24. raft_airgap = 0.25
  25. retraction_prime_speed = =retraction_speed
  26. speed_print = 50
  27. speed_wall = 50
  28. support_bottom_distance = =support_z_distance
  29. support_interface_enable = True
  30. support_top_distance = =support_z_distance
  31. support_z_distance = =math.ceil(0.3/layer_height)*layer_height
  32. top_bottom_thickness = 1.2
  33. wall_line_width_0 = =line_width * (1 + magic_spiralize * 0.25)