um_s5_aa0.4_cpe-plus_0.1mm.inst.cfg 984 B

123456789101112131415161718192021222324252627282930313233343536
  1. [general]
  2. definition = ultimaker_s5
  3. name = Fine
  4. version = 4
  5. [metadata]
  6. material = generic_cpe_plus
  7. quality_type = normal
  8. setting_version = 23
  9. type = quality
  10. variant = AA 0.4
  11. weight = 0
  12. [values]
  13. infill_wipe_dist = 0
  14. machine_min_cool_heat_time_window = 15
  15. machine_nozzle_cool_down_speed = 0.85
  16. machine_nozzle_heat_up_speed = 1.5
  17. material_print_temperature = =default_material_print_temperature - 5
  18. multiple_mesh_overlap = 0
  19. prime_tower_enable = True
  20. prime_tower_wipe_enabled = True
  21. retraction_hop = 0.2
  22. retraction_hop_enabled = False
  23. retraction_hop_only_when_collides = True
  24. retraction_prime_speed = =retraction_speed
  25. speed_print = 40
  26. speed_topbottom = =math.ceil(speed_print * 30 / 35)
  27. speed_wall = =math.ceil(speed_print * 35 / 40)
  28. speed_wall_0 = =math.ceil(speed_wall * 30 / 35)
  29. support_bottom_distance = =support_z_distance
  30. support_interface_enable = True
  31. support_top_distance = =support_z_distance
  32. support_z_distance = =math.ceil(0.4/layer_height)*layer_height
  33. wall_0_inset = 0