um_methodx_labs_um-nylon12-cf-175_0.2mm.inst.cfg 1.3 KB

1234567891011121314151617181920212223242526272829303132333435363738394041424344454647484950515253
  1. [general]
  2. definition = ultimaker_methodx
  3. name = Fast - Experimental
  4. version = 4
  5. [metadata]
  6. is_experimental = True
  7. material = ultimaker_nylon12-cf_175
  8. quality_type = draft
  9. setting_version = 23
  10. type = quality
  11. variant = LABS
  12. weight = -2
  13. [values]
  14. cool_fan_enabled = False
  15. material_final_print_temperature = =default_material_print_temperature-5
  16. material_initial_print_temperature = =default_material_print_temperature-5
  17. raft_airgap = 0.3
  18. raft_base_line_spacing = 3
  19. raft_base_line_width = 1.2
  20. raft_base_speed = 10
  21. retract_at_layer_change = True
  22. retraction_amount = 0.5
  23. retraction_min_travel = 3.2
  24. roofing_material_flow = 100
  25. small_skin_width = 3.6
  26. speed_prime_tower = 30.0
  27. speed_print = 120.0
  28. speed_roofing = 55
  29. speed_topbottom = 55
  30. speed_travel = 250.0
  31. speed_wall_0 = 45
  32. speed_wall_x = 65
  33. support_angle = 50
  34. support_bottom_density = 24
  35. support_bottom_enable = False
  36. support_bottom_line_width = 0.6
  37. support_bottom_stair_step_height = 0
  38. support_fan_enable = False
  39. support_infill_rate = 12.0
  40. support_interface_enable = True
  41. support_interface_pattern = lines
  42. support_line_width = 0.3
  43. support_pattern = lines
  44. support_roof_density = 97
  45. support_roof_height = 1.015
  46. support_roof_line_width = 0.25
  47. support_use_towers = False
  48. support_xy_distance = 0.2
  49. support_xy_distance_overhang = 0.15
  50. support_z_distance = 0.25