um_methodx_labs_um-asa-175_0.2mm.inst.cfg 1.1 KB

1234567891011121314151617181920212223242526272829303132333435363738394041424344454647484950
  1. [general]
  2. definition = ultimaker_methodx
  3. name = Fast - Experimental
  4. version = 4
  5. [metadata]
  6. is_experimental = True
  7. material = ultimaker_asa_175
  8. quality_type = draft
  9. setting_version = 23
  10. type = quality
  11. variant = LABS
  12. weight = -2
  13. [values]
  14. cool_fan_enabled = False
  15. material_print_temperature_layer_0 = =default_material_print_temperature+5
  16. raft_airgap = 0.3
  17. raft_base_speed = 10
  18. retract_at_layer_change = True
  19. retraction_amount = 0.5
  20. retraction_min_travel = 3.2
  21. roofing_material_flow = 98.0
  22. small_skin_width = 3.6
  23. speed_prime_tower = 30.0
  24. speed_print = 120.0
  25. speed_roofing = 55
  26. speed_topbottom = 55
  27. speed_travel = 250.0
  28. speed_wall_0 = 45
  29. speed_wall_x = 65
  30. support_angle = 50
  31. support_bottom_density = 24
  32. support_bottom_enable = False
  33. support_bottom_line_width = 0.6
  34. support_bottom_stair_step_height = 0
  35. support_fan_enable = False
  36. support_infill_rate = 12.0
  37. support_interface_enable = True
  38. support_interface_pattern = lines
  39. support_line_width = 0.3
  40. support_pattern = lines
  41. support_roof_density = 97
  42. support_roof_height = 1.015
  43. support_roof_line_width = 0.25
  44. support_use_towers = False
  45. support_xy_distance = 0.2
  46. support_xy_distance_overhang = 0.15
  47. support_z_distance = 0.25