tinyboy_fabrikator15_draft.inst.cfg 1.3 KB

1234567891011121314151617181920212223242526272829303132333435363738394041424344454647484950515253545556575859
  1. [general]
  2. definition = tinyboy_fabrikator15
  3. name = Draft
  4. version = 4
  5. [metadata]
  6. global_quality = True
  7. quality_type = draft
  8. setting_version = 23
  9. type = quality
  10. weight = 0
  11. [values]
  12. acceleration_enabled = True
  13. acceleration_print = 1800
  14. acceleration_travel = 3000
  15. adhesion_type = skirt
  16. brim_width = 4.0
  17. cool_fan_full_at_height = 0.5
  18. cool_fan_speed = 100
  19. cool_fan_speed_0 = 100
  20. infill_overlap = 15
  21. infill_pattern = zigzag
  22. infill_sparse_density = 25
  23. initial_layer_line_width_factor = 140
  24. jerk_enabled = True
  25. jerk_print = 8
  26. jerk_travel = 10
  27. layer_height = 0.3
  28. layer_height_0 = 0.3
  29. material_bed_temperature = 60
  30. retract_at_layer_change = False
  31. retraction_amount = 6
  32. retraction_hop = 0.075
  33. retraction_hop_enabled = True
  34. retraction_hop_only_when_collides = True
  35. retraction_min_travel = 1.5
  36. retraction_speed = 40
  37. skirt_brim_speed = 40
  38. skirt_gap = 5
  39. skirt_line_count = 3
  40. speed_infill = =speed_print
  41. speed_print = 60
  42. speed_support = 60
  43. speed_topbottom = =math.ceil(speed_print * 30 / 60)
  44. speed_travel = 100
  45. speed_wall = =speed_print
  46. speed_wall_x = =speed_print
  47. support_angle = 60
  48. support_enable = True
  49. support_interface_enable = True
  50. support_pattern = triangles
  51. support_roof_enable = True
  52. support_type = everywhere
  53. support_use_towers = False
  54. support_xy_distance = 0.7
  55. top_bottom_thickness = 1.2
  56. wall_thickness = 1.2