s3d_std0.6_PA6GF_B.inst.cfg 1.9 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263
  1. [general]
  2. definition = strateo3d
  3. name = B
  4. version = 4
  5. [metadata]
  6. material = emotiontech_pa6gf
  7. quality_type = b
  8. setting_version = 23
  9. type = quality
  10. variant = Standard 0.6
  11. weight = 1
  12. [values]
  13. bridge_fan_speed = 80
  14. bridge_settings_enabled = True
  15. bridge_skin_density = 80
  16. bridge_skin_material_flow = 60
  17. bridge_skin_speed = 8
  18. bridge_wall_coast = 50
  19. bridge_wall_material_flow = 50
  20. bridge_wall_speed = 8
  21. cool_fan_enabled = True
  22. cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
  23. cool_fan_speed = 20
  24. cool_fan_speed_max = 80
  25. cool_lift_head = True
  26. cool_min_layer_time = 2
  27. cool_min_layer_time_fan_speed_max = 20
  28. cool_min_speed = 2
  29. layer_height_0 = =round(0.67*machine_nozzle_size, 2)
  30. line_width = =machine_nozzle_size/machine_nozzle_size*0.4
  31. material_final_print_temperature = =default_material_print_temperature
  32. material_flow = 91
  33. material_initial_print_temperature = =default_material_print_temperature
  34. material_print_temperature = =default_material_print_temperature
  35. material_print_temperature_layer_0 = =default_material_print_temperature + 5
  36. meshfix_maximum_deviation = 0.04
  37. meshfix_maximum_resolution = 0.5
  38. prime_tower_enable = True
  39. retraction_extra_prime_amount = 0.1
  40. retraction_hop_only_when_collides = True
  41. retraction_min_travel = =3*line_width
  42. skin_material_flow = 92
  43. skin_overlap = 15
  44. speed_layer_0 = =math.ceil(speed_print * 25/55)
  45. speed_print = 35
  46. speed_slowdown_layers = 2
  47. speed_topbottom = =math.ceil(speed_print * 37/55)
  48. speed_wall = =math.ceil(speed_print * 37/55)
  49. speed_wall_0 = =math.ceil(speed_wall * 33/37)
  50. support_angle = 60
  51. support_bottom_distance = =support_z_distance*0.5
  52. support_interface_density = 100
  53. support_offset = 1
  54. support_xy_distance = =line_width * 1.7
  55. support_xy_distance_overhang = =wall_line_width_0
  56. support_z_distance = =layer_height*2
  57. wall_0_wipe_dist = =machine_nozzle_size/2
  58. wall_line_count = 3
  59. wall_line_width = =machine_nozzle_size/machine_nozzle_size*0.35
  60. wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.3