| 1234567891011121314151617181920212223242526272829303132333435363738394041424344454647484950515253545556575859606162 |
- {
- "name": "Robo 3D R1",
- "version": 2,
- "inherits": "fdmprinter",
- "metadata": {
- "visible": true,
- "author": "Ultimaker",
- "manufacturer": "Robo 3D",
- "file_formats": "text/x-gcode",
- "platform_offset": [ 0, 0, 0],
- "machine_extruder_trains":
- {
- "0": "robo_3d_r1_extruder_0"
- }
- },
- "overrides": {
- "machine_start_gcode": {
- "default_value": " G92 E0 ;\n M565 Z-1 ;\n G1 Z5 F5000 ;\n G29 ;\n"
- },
- "machine_end_gcode": {
- "default_value": " M104 S0 ;extruder heater off\n M140 S0 ;heated bed heater off (if you have it)\n G91 ;relative positioning\n G1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\n G1 Z+0.5 E-5 X-20 Y-20 F{speed_travel} ;move Z up a bit and retract filament even more\n G28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way\n M84 ;steppers off\n G90 ;absolute positioning\n"
- },
- "cool_min_layer_time": { "default_value": 7 },
- "speed_topbottom": { "default_value": 40 },
- "retraction_speed": { "default_value": 50 },
- "layer_0_z_overlap": { "default_value": 0.2 },
- "cool_min_speed": { "default_value": 19 },
- "material_bed_temperature": { "default_value": 60 },
- "support_angle": { "default_value": 50 },
- "speed_layer_0": { "default_value": 30 },
- "line_width": { "default_value": 0.4 },
- "speed_infill": { "default_value": 60 },
- "prime_tower_size": { "default_value": 8.660254037844387 },
- "support_enable": { "default_value": true },
- "cool_fan_full_at_height": { "default_value": 0.1 },
- "bottom_thickness": { "default_value": 1.2 },
- "raft_airgap": { "default_value": 0.2 },
- "layer_height_0": { "default_value": 0.15 },
- "top_thickness": { "default_value": 1.2 },
- "speed_wall_0": { "default_value": 40 },
- "retraction_min_travel": { "default_value": 5 },
- "material_flow": { "default_value": 100 },
- "infill_sparse_density": { "default_value": 10 },
- "wall_thickness": { "default_value": 1.2 },
- "material_print_temperature": { "default_value": 190 },
- "retraction_amount": { "default_value": 3 },
- "layer_height": { "default_value": 0.2 },
- "speed_print": { "default_value": 40 },
- "machine_extruder_count": { "default_value": 1 },
- "retraction_combing": { "default_value": "off" },
- "machine_heated_bed": { "default_value": true },
- "machine_center_is_zero": { "default_value": false },
- "machine_height": { "default_value": 210 },
- "adhesion_type": { "default_value": "raft" },
- "machine_gcode_flavor": { "default_value": "RepRap (Marlin/Sprinter)" },
- "machine_depth": { "default_value": 245 },
- "machine_width": { "default_value": 225 },
- "support_z_distance": { "default_value": 0.22 },
- "machine_name": { "default_value": "ROBO 3D R1" }
- }
- }
|
