elegoo_neptune_3pro.def.json 2.0 KB

1234567891011121314151617181920212223242526272829303132333435363738
  1. {
  2. "version": 2,
  3. "name": "ELEGOO NEPTUNE 3 Pro",
  4. "inherits": "elegoo_base",
  5. "metadata":
  6. {
  7. "visible": true,
  8. "author": "NARUTO",
  9. "quality_definition": "elegoo_base"
  10. },
  11. "overrides":
  12. {
  13. "infill_overlap": { "value": "0 if infill_sparse_density < 40.01 and infill_pattern != 'concentric' else -5" },
  14. "machine_depth": { "default_value": 235 },
  15. "machine_end_gcode": { "default_value": "G91 ;Relative positionning\nG1 E-2 F2700 ;Retract a bit\nG1 E-8 X5 Y5 Z3 F3000 ;Retract\nG90 ;Absolute positionning\nG1 X0 Y{machine_depth} ;Present print\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\nM84 X Y E ;Disable all steppers but Z" },
  16. "machine_head_with_fans_polygon":
  17. {
  18. "value": [
  19. [-55, 30],
  20. [55, 30],
  21. [55, -35],
  22. [-55, -35]
  23. ]
  24. },
  25. "machine_height": { "default_value": 280 },
  26. "machine_name": { "default_value": "ELEGOO NEPTUNE 3 Pro" },
  27. "machine_start_gcode": { "default_value": ";ELEGOO NEPTUNE 3 Pro\nM220 S100 ;Set the feed speed to 100%\nM221 S100 ;Set the flow rate to 100%\nG90\nG28 ;home\n;M420 S1 Z10;Uncomment to enable progressive compensation height of 10mm\nG92 E0 ;Reset Extruder\nG1 Z0.45 F300\nG1 X1.5 Y20 F5000.0 ;Move to start position\nG1 Y120.0 F600.0 E15 ;Draw the first line\nG1 X0.5 F1000.0 ;Move to side a little\nG1 Y20 F600 E30 ;Draw the second line\nG92 E0 ;Reset Extruder" },
  28. "machine_width": { "default_value": 235 },
  29. "material_bed_temperature": { "value": "default_material_bed_temperature + 10" },
  30. "retraction_amount": { "value": 1 },
  31. "retraction_count_max": { "value": 80 },
  32. "retraction_prime_speed": { "resolve": 25 },
  33. "retraction_retract_speed": { "resolve": 25 },
  34. "retraction_speed": { "resolve": 25 },
  35. "speed_travel": { "value": "150 if speed_print < 100 else speed_print * 1.5" },
  36. "speed_travel_layer_0": { "value": "100" }
  37. }
  38. }