Cura/resources/definitions/elegoo_neptune_2s.def.json

{
    "version": 2,
    "name": "ELEGOO NEPTUNE 2S",
    "inherits": "elegoo_base",
    "metadata":
    {
        "visible": true,
        "author": "NARUTO",
        "quality_definition": "elegoo_base"
    },
    "overrides":
    {
        "machine_depth": { "default_value": 235 },
        "machine_end_gcode": { "default_value": "G91 ;Relative positionning\nG1 E-2 F2700 ;Retract a bit\nG1 E-10 X5 Y5 Z3 F3000 ;Retract\nG90 ;Absolute positionning\nG1 X0 Y{machine_depth} ;Present print\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\nM84 X Y E ;Disable all steppers but Z" },
        "machine_head_with_fans_polygon":
        {
            "value": [
                [-55, 20],
                [55, 20],
                [55, -25],
                [-55, -25]
            ]
        },
        "machine_height": { "default_value": 260 },
        "machine_name": { "default_value": "ELEGOO NEPTUNE 2S" },
        "machine_start_gcode": { "default_value": ";ELEGOO NEPTUNE 2S\nG90\nG28 ;home\nG1 Z0.6 F100 ;Move Z Axis up\nG92 E0 ;Reset Extruder\nG1 X1.5 Y20 F5000.0 ;Move to start position\nG1 Y120.0 F600.0 E20 ;Draw the first line\nG1 X0.5 F1000.0 ;Move to side a little\nG1 Y20 F600.0 E40 ;Draw the second line\nG92 E0 ;Reset Extruder" },
        "machine_width": { "default_value": 235 },
        "material_bed_temperature": { "value": "default_material_bed_temperature + 10" }
    }
}