Cura/resources/quality/xyzprinting/petg/xyzprinting_da_vinci_pro_evo_hs_0.40_petg_normal.inst.cfg

[general]
definition = xyzprinting_da_vinci_pro_evo
name = Normal Quality
version = 4

[metadata]
material = xyzprinting_petg
quality_type = normal
setting_version = 23
type = quality
variant = Hardened Steel 0.4mm Nozzle
weight = -1

[values]
acceleration_infill = 1000.0
acceleration_wall = 1000.0
adhesion_type = skirt
bridge_skin_speed = 20
infill_sparse_density = 10
layer_height = 0.2
layer_height_0 = 0.30
material_bed_temperature = 70
material_bed_temperature_layer_0 = =material_bed_temperature
material_diameter = 1.75
material_final_print_temperature = =material_print_temperature
material_initial_print_temperature = =material_print_temperature
material_print_temperature_layer_0 = =material_print_temperature
retraction_amount = 3
retraction_prime_speed = =retraction_speed
retraction_speed = 20
speed_infill = 60
speed_print = 30
speed_support = =speed_print
speed_travel = 80
speed_wall = =speed_print