um_s3_aa0.4_cpe-plus_0.15mm.inst.cfg 843 B

123456789101112131415161718192021222324252627282930313233
  1. [general]
  2. definition = ultimaker_s3
  3. name = Normal
  4. version = 4
  5. [metadata]
  6. material = generic_cpe_plus
  7. quality_type = fast
  8. setting_version = 23
  9. type = quality
  10. variant = AA 0.4
  11. weight = -1
  12. [values]
  13. infill_wipe_dist = 0
  14. machine_min_cool_heat_time_window = 15
  15. multiple_mesh_overlap = 0
  16. prime_tower_enable = True
  17. prime_tower_wipe_enabled = True
  18. retraction_hop = 0.2
  19. retraction_hop_enabled = False
  20. retraction_hop_only_when_collides = True
  21. retraction_prime_speed = =retraction_speed
  22. speed_print = 45
  23. speed_topbottom = =math.ceil(speed_print * 35 / 45)
  24. speed_wall = =math.ceil(speed_print * 45 / 45)
  25. speed_wall_0 = =math.ceil(speed_wall * 35 / 45)
  26. support_bottom_distance = =support_z_distance
  27. support_interface_enable = True
  28. support_top_distance = =support_z_distance
  29. support_z_distance = =math.ceil(0.4/layer_height)*layer_height
  30. wall_0_inset = 0