fusion3_0.4_TPU_normal.inst.cfg 1.0 KB

1234567891011121314151617181920212223242526272829303132333435363738394041424344454647484950
  1. [general]
  2. definition = fusion3
  3. name = Normal Quality
  4. version = 4
  5. [metadata]
  6. material = generic_tpu
  7. quality_type = normal
  8. setting_version = 23
  9. type = quality
  10. variant = 0.4mm Nozzle
  11. [values]
  12. cool_fan_enabled = True
  13. cool_fan_full_layer = 60
  14. cool_fan_speed = 50
  15. cool_fan_speed_min = 15
  16. cool_min_layer_time = 15
  17. infill_overlap = 20
  18. infill_sparse_density = 30
  19. inset_direction = outside_in
  20. layer_height_0 = 0.2
  21. line_width = 0.4
  22. material_bed_temperature = 45
  23. material_flow = 125
  24. material_flow_layer_0 = 125
  25. material_print_temperature = 255
  26. retract_at_layer_change = False
  27. retraction_amount = 10
  28. retraction_combing = noskin
  29. retraction_combing_max_distance = 10
  30. retraction_speed = 50
  31. skirt_gap = 5
  32. skirt_line_count = 3
  33. speed_infill = 20
  34. speed_layer_0 = 20
  35. speed_print = 25
  36. speed_support = 12
  37. speed_topbottom = 25
  38. speed_wall = 20
  39. speed_wall_0 = 20
  40. speed_wall_x = 20
  41. support_angle = 50
  42. support_enable = True
  43. support_infill_rate = 30
  44. top_bottom_thickness = 0.6
  45. wall_thickness = 0.8
  46. xy_offset_layer_0 = -0.15
  47. zig_zaggify_infill = True