fusion3_0.6_ABS_good.inst.cfg 916 B

12345678910111213141516171819202122232425262728293031323334353637383940414243
  1. [general]
  2. definition = fusion3
  3. name = Good Quality
  4. version = 4
  5. [metadata]
  6. material = generic_abs
  7. quality_type = good
  8. setting_version = 22
  9. type = quality
  10. variant = 0.6mm Nozzle
  11. [values]
  12. adhesion_type = brim
  13. cool_fan_enabled = True
  14. cool_fan_full_layer = 70
  15. cool_fan_speed = 65
  16. cool_fan_speed_min = 15
  17. cool_min_layer_time = 3
  18. cool_min_layer_time_fan_speed_max = 60
  19. infill_sparse_density = 30
  20. inset_direction = outside_in
  21. layer_height = 0.3
  22. layer_height_0 = 0.3
  23. line_width = 0.4
  24. material_bed_temperature = 110
  25. material_flow = 98
  26. material_print_temperature = 275.0
  27. retract_at_layer_change = False
  28. retraction_amount = 2.25
  29. retraction_combing = noskin
  30. retraction_combing_max_distance = 10
  31. retraction_speed = 55
  32. speed_print = 35
  33. speed_travel_layer_0 = 100
  34. support_angle = 45
  35. support_enable = True
  36. support_infill_rate = 25
  37. top_bottom_thickness = 0.9
  38. wall_thickness = 1.2
  39. xy_offset_layer_0 = -0.2
  40. zig_zaggify_infill = True