Cura/resources/variants/strateo3d/strateo3d_standard_10.inst.cfg

[general]
definition = strateo3d
name = Standard 1.0 Experimental
version = 4

[metadata]
hardware_type = nozzle
setting_version = 22
type = variant

[values]
layer_height = 0.5
layer_height_0 = 0.6
machine_nozzle_id = Standard 1.0 Experimental
machine_nozzle_size = 1.0
machine_nozzle_tip_outer_diameter = 2.5
prime_tower_mode = normal
retract_at_layer_change = True
support_angle = 50
support_use_towers = True