fusion3_0.6_ASA_low.inst.cfg 891 B

12345678910111213141516171819202122232425262728293031323334353637383940414243
  1. [general]
  2. definition = fusion3
  3. name = Low Quality
  4. version = 4
  5. [metadata]
  6. material = generic_asa_175
  7. quality_type = low
  8. setting_version = 22
  9. type = quality
  10. variant = 0.6mm Nozzle
  11. [values]
  12. cool_fan_enabled = True
  13. cool_fan_full_layer = 70
  14. cool_fan_speed = 25
  15. cool_fan_speed_min = 15
  16. cool_min_layer_time = 13
  17. infill_overlap = 15
  18. infill_sparse_density = 30
  19. inset_direction = outside_in
  20. layer_height_0 = 0.35
  21. line_width = 0.65
  22. material_bed_temperature = 100
  23. material_flow = 98
  24. material_flow_layer_0 = 98
  25. material_print_temperature = 290
  26. retract_at_layer_change = False
  27. retraction_amount = 4
  28. retraction_combing = noskin
  29. retraction_combing_max_distance = 10
  30. retraction_speed = 115
  31. skirt_gap = 5
  32. skirt_line_count = 1
  33. speed_print = 75
  34. support_angle = 45
  35. support_enable = True
  36. support_infill_rate = 30
  37. top_bottom_thickness = 1
  38. wall_thickness = 1.3
  39. xy_offset_layer_0 = -0.2
  40. zig_zaggify_infill = True