fusion3_0.4_PETG_normal.inst.cfg 913 B

12345678910111213141516171819202122232425262728293031323334353637383940414243
  1. [general]
  2. definition = fusion3
  3. name = Normal Quality
  4. version = 4
  5. [metadata]
  6. material = generic_petg
  7. quality_type = normal
  8. setting_version = 22
  9. type = quality
  10. variant = 0.4mm Nozzle
  11. [values]
  12. cool_fan_enabled = True
  13. cool_fan_full_layer = 60
  14. cool_fan_speed = 75
  15. cool_fan_speed_min = 15
  16. cool_min_layer_time = 4
  17. cool_min_layer_time_fan_speed_max = 70
  18. infill_overlap = 20
  19. infill_sparse_density = 30
  20. inset_direction = outside_in
  21. layer_height_0 = 0.2
  22. line_width = 0.4
  23. material_bed_temperature = 65
  24. material_flow = 97
  25. material_flow_layer_0 = 97
  26. material_print_temperature = 260
  27. retract_at_layer_change = False
  28. retraction_amount = 4.6
  29. retraction_combing = noskin
  30. retraction_combing_max_distance = 10
  31. retraction_speed = 110
  32. skirt_gap = 5
  33. speed_print = 85
  34. support_angle = 45
  35. support_enable = True
  36. support_infill_rate = 30
  37. top_bottom_thickness = 0.6
  38. wall_thickness = 0.8
  39. xy_offset_layer_0 = -0.15
  40. zig_zaggify_infill = True