flsun_sr_normal.inst.cfg 1.9 KB

1234567891011121314151617181920212223242526272829303132333435363738394041424344454647484950515253545556575859606162636465666768697071727374757677787980
  1. [general]
  2. definition = flsun_sr
  3. name = Normal
  4. version = 4
  5. [metadata]
  6. global_quality = True
  7. quality_type = normal
  8. setting_version = 22
  9. type = quality
  10. weight = -2
  11. [values]
  12. acceleration_enabled = False
  13. adhesion_type = skirt
  14. brim_width = 4.0
  15. cool_fan_speed = 100
  16. cool_lift_head = False
  17. cool_min_layer_time = 4
  18. infill_before_walls = False
  19. infill_enable_travel_optimization = False
  20. infill_pattern = grid
  21. infill_support_angle = 50
  22. ironing_enabled = False
  23. ironing_only_highest_layer = True
  24. jerk_enabled = False
  25. jerk_travel = 25
  26. jerk_travel_layer_0 = 20
  27. jerk_wall_0 = 10
  28. layer_height = 0.2
  29. layer_height_0 = 0.2
  30. material_bed_temperature_layer_0 = 60
  31. material_final_print_temperature = 220
  32. material_initial_print_temperature = 220
  33. material_print_temperature = 220
  34. material_print_temperature_layer_0 = 220
  35. optimize_wall_printing_order = True
  36. retract_at_layer_change = False
  37. retraction_amount = 6.5
  38. retraction_combing = noskin
  39. retraction_combing_max_distance = 10
  40. retraction_hop = 0.3
  41. retraction_hop_enabled = True
  42. retraction_hop_only_when_collides = True
  43. retraction_speed = 40
  44. skin_no_small_gaps_heuristic = True
  45. skin_overlap = 10
  46. skirt_line_count = 2
  47. small_feature_speed_factor = 60
  48. small_hole_max_size = 5
  49. speed_infill = 150
  50. speed_layer_0 = 25
  51. speed_print = 150
  52. speed_slowdown_layers = 5
  53. speed_support = 80
  54. speed_topbottom = 70
  55. speed_travel = 180
  56. speed_travel_layer_0 = 50
  57. speed_z_hop = 50
  58. support_angle = 60
  59. support_brim_enable = True
  60. support_brim_width = 4.0
  61. support_enable = True
  62. support_interface_density = 60
  63. support_interface_enable = True
  64. support_interface_height = 0.6
  65. support_interface_pattern = grid
  66. support_roof_density = 60
  67. support_type = everywhere
  68. support_wall_count = 1
  69. support_xy_distance = 0.5
  70. support_z_distance = 0.2
  71. top_bottom_thickness = =layer_height*5
  72. travel_avoid_other_parts = True
  73. travel_avoid_supports = True
  74. travel_retract_before_outer_wall = False
  75. wall_thickness = =line_width*3
  76. z_seam_corner = z_seam_corner_inner
  77. z_seam_type = sharpest_corner