Cura/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_Fast_Print.inst.cfg

[general]
version = 4
name = Normal
definition = ultimaker_s5

[metadata]
setting_version = 20
type = quality
quality_type = fast
weight = -1
material = generic_cpe_plus
variant = AA 0.4

[values]
cool_fan_speed_max = 80
cool_min_speed = 6

infill_overlap = 0
infill_wipe_dist = 0
jerk_enabled = True
jerk_print = 25
machine_min_cool_heat_time_window = 15
material_final_print_temperature = =material_print_temperature - 10
material_initial_print_temperature = =material_print_temperature - 5
material_print_temperature = =default_material_print_temperature + 10
material_print_temperature_layer_0 = =material_print_temperature
multiple_mesh_overlap = 0
prime_tower_enable = True
prime_tower_wipe_enabled = True
retraction_combing_max_distance = 50
retraction_extrusion_window = 1
retraction_hop = 0.2
retraction_hop_enabled = False
retraction_hop_only_when_collides = True
retraction_prime_speed = =retraction_speed
skin_overlap = 20
speed_layer_0 = =math.ceil(speed_print * 20 / 45)
speed_print = 45
speed_topbottom = =math.ceil(speed_print * 35 / 45)

speed_wall = =math.ceil(speed_print * 45 / 45)
speed_wall_0 = =math.ceil(speed_wall * 35 / 45)
support_bottom_distance = =support_z_distance
support_z_distance = =layer_height
wall_0_inset = 0