Cura/resources/definitions/ultimaker.def.json

{
    "version": 2,
    "name": "Ultimaker",
    "inherits": "fdmprinter",
    "metadata": {
        "author": "Ultimaker",
        "manufacturer": "Ultimaker B.V.",
        "visible": false,
        "exclude_materials": [ "generic_hips", "structur3d_dap100silicone" ]
    },
    "overrides": {
        "machine_max_feedrate_e": {
            "default_value": 45
        },
        "material_print_temperature": {
            "minimum_value": "0"
        },
        "material_bed_temperature": {
            "minimum_value": "0",
            "maximum_value_warning": "125"
        },
        "material_bed_temperature_layer_0":
        {
            "maximum_value_warning": "125"
        },
        "material_standby_temperature": {
            "value": "material_print_temperature - 100",
            "minimum_value": "0"
        },
        "extruder_prime_pos_y":
        {
            "minimum_value": "0",
            "maximum_value": "machine_depth"
        },
        "extruder_prime_pos_x":
        {
            "minimum_value": "0",
            "maximum_value": "machine_width"
        },
        "relative_extrusion":
        {
            "value": false,
            "enabled": false
        },
        "skin_angles": {
            "value": "[] if infill_pattern not in ['cross', 'cross_3d'] else [20, 110]"
        },
        "line_width": {
            "value": "machine_nozzle_size"
        },
        "wall_thickness": {
            "value": "wall_line_width_0 + wall_line_width_x"
        },
        "infill_material_flow": {
            "value": "(1.95-infill_sparse_density / 100 if infill_sparse_density > 95 else 1) * material_flow"
        },
        "inset_direction": {
            "value": "'outside_in'"
        },
        "retraction_combing": {
            "value": "'no_outer_surfaces'"
        },
        "retraction_count_max": {
            "value": 25
        },
        "retraction_extrusion_window": {
            "value": 1
        },
        "roofing_layer_count": {
            "value": "1"
        },
        "roofing_material_flow": {
            "value": "material_flow"
        },
        "skin_material_flow": {
            "value": "0.95 * material_flow"
        },
        "support_interface_material_flow": {
            "value": "skin_material_flow"
        },
        "skin_monotonic" : {
            "value": "roofing_layer_count == 0"
        },
        "speed_equalize_flow_width_factor": {
            "value": "110.0"
        },
        "top_layers": {
            "value": "math.ceil(round(top_thickness / resolveOrValue('layer_height'), 4))"
        },
        "bottom_layers": {
            "value": "math.ceil(round(bottom_thickness / resolveOrValue('layer_height'), 4))"
        },
        "xy_offset": {
            "value": "-layer_height * 0.1"
        },
        "meshfix_maximum_resolution": {
            "value": "max(speed_wall_0 / 75, 0.5)"
        },
        "meshfix_maximum_deviation": {
            "value": "machine_nozzle_size / 10"
        },
        "jerk_travel_enabled": {
            "value": false
        },
        "acceleration_travel_enabled": {
            "value": false
        },
        "acceleration_travel": {
            "value": "acceleration_wall"
        },
        "skin_edge_support_thickness": {
            "value": "4 * layer_height if infill_sparse_density < 30 else 0"
        },
        "bridge_settings_enabled": {
            "value": false
        },
        "bridge_wall_min_length": {
            "value": 0
        },
        "bridge_skin_support_threshold": {
            "value": 50
        },
        "bridge_sparse_infill_max_density": {
            "value": 0
        },
        "bridge_wall_coast": {
            "value": 0
        },
        "bridge_wall_speed": {
            "value": "speed_wall"
        },
        "bridge_wall_material_flow": {
            "value": "wall_material_flow"
        },
        "bridge_skin_speed": {
            "value": "speed_topbottom"
        },
        "bridge_skin_material_flow": {
            "value": "skin_material_flow"
        },
        "bridge_skin_density": {
            "value": "80"
        },
        "bridge_fan_speed": {
             "value": "cool_fan_speed_max"
        },
        "bridge_enable_more_layers": {
            "value": false
        },
        "bridge_skin_speed_2": {
            "value": "speed_topbottom"
        },
        "bridge_skin_material_flow_2": {
            "value": "skin_material_flow"
        },
        "bridge_skin_density_2": {
            "value": 100
        },
        "bridge_fan_speed_2": {
            "value": "cool_fan_speed_min"
        },
        "bridge_skin_speed_3": {
             "value": "speed_topbottom"
        },
        "bridge_skin_material_flow_3": {
            "value": "skin_material_flow"
        },
        "bridge_skin_density_3": {
             "value": 100
        },
        "bridge_fan_speed_3": {
             "value": "cool_fan_speed_min"
        },
        "jerk_print": {
            "value": "20",
            "minimum_value_warning": 20
        },
        "jerk_infill": {
            "minimum_value_warning": 20
        },
        "jerk_wall": {
            "minimum_value_warning": 20
        },
        "jerk_wall_0": {
            "minimum_value_warning": 20
        },
        "jerk_roofing": {
            "minimum_value_warning": 20
        },
        "jerk_topbottom": {
            "minimum_value_warning": 20
        },
        "jerk_support": {
            "minimum_value_warning": 20
        },
        "jerk_support_infill": {
            "minimum_value_warning": 20
        },
        "jerk_support_interface": {
            "minimum_value_warning": 20
        },
        "jerk_prime_tower": {
            "minimum_value_warning": 20
        },
        "jerk_layer_0": {
            "minimum_value_warning": 20
        },
        "jerk_print_layer_0": {
            "minimum_value_warning": 20
        },
        "jerk_travel": {
            "value": "jerk_print",
            "minimum_value_warning": 20
        },
        "jerk_travel_layer_0": {
            "minimum_value_warning": 20
        },
        "jerk_skirt_brim": {
            "minimum_value_warning": 20
        },
        "support_wall_count": {
            "value": "1 if support_structure == 'tree' else 0"
        },
        "zig_zaggify_support": {
            "value": true
        },
        "support_infill_rate": {
            "value": "0 if support_structure == 'tree' else 80 if gradual_support_infill_steps != 0 else 15"
        },
        "support_line_distance": {
            "minimum_value_warning": "0 if support_structure == 'tree' else support_line_width"
        },
        "support_initial_layer_line_distance": {
            "minimum_value_warning": "0 if support_structure == 'tree' else support_line_width"
        },
        "gradual_support_infill_steps": {
            "value": "2 if support_interface_enable else 0"
        },
        "gradual_support_infill_step_height": {
            "value": "4*layer_height"
        },
        "raft_base_thickness": {
            "value": "min(machine_nozzle_size * 0.75, 0.3)"
        },
        "raft_interface_line_width": {
            "value": "(raft_base_line_width + raft_surface_line_width) / 2"
        },
        "raft_interface_thickness": {
            "value": "(raft_base_thickness + raft_surface_thickness) / 2"
        },
        "support_interface_height": {
            "value": "2*layer_height"
        },
        "support_offset": {
            "value": "support_xy_distance if support_interface_enable else 0"
        },
        "support_xy_distance": {
            "value": "1"
        },
        "support_xy_distance_overhang": {
            "value": "0.2"
        },
        "minimum_support_area": {
            "value": "(2 + support_offset)**2"
        },
        "support_interface_skip_height": {
            "value": "layer_height"
        },
        "support_interface_pattern": {
            "value": "'concentric'"
        },
        "support_interface_offset": {
            "value": "support_offset"
        },
        "support_use_towers": {
            "value": false
        },
        "support_z_distance": {
            "value": "0"
        },
        "top_bottom_pattern": {
            "value": "'zigzag'"
        }
    }
}