Cura/resources/quality/weedo_x40/0.4_generic_ABS_Extra_Fine.inst.cfg

[general]
version = 4
name = Default - Extra Fine
definition = weedo_x40

[metadata]
setting_version = 16
type = quality
quality_type = extra fine
weight = 1
material = generic_abs_175
variant = 0.4mm Nozzle


[values]
layer_height = 0.12
layer_height_0 = =round(layer_height * 1.5, 2)
support_fan_enable = True
support_supported_skin_fan_speed = 100
cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
cool_fan_speed_max = =cool_fan_speed
cool_min_speed = 7
infill_line_width = =round(line_width * 0.42 / 0.35, 2)
machine_nozzle_cool_down_speed = 0.75
machine_nozzle_heat_up_speed = 1.6
material_standby_temperature = 100
prime_tower_enable = False
skin_overlap = 10

speed_print = 30
speed_layer_0 = =round(speed_print / 2.5, 2)
speed_print_layer_0 = =speed_layer_0
speed_infill = =speed_print
speed_support_interface = =speed_print
speed_wall = =round(speed_print / 2, 2)
speed_wall_0 = =speed_wall
speed_wall_x = =speed_wall
speed_topbottom = =speed_wall