nps_PETG_A.inst.cfg 1.1 KB

12345678910111213141516171819202122232425262728293031323334353637383940414243
  1. [general]
  2. definition = nps
  3. name = A
  4. version = 4
  5. [metadata]
  6. material = generic_petg
  7. quality_type = a
  8. setting_version = 22
  9. type = quality
  10. weight = 1
  11. [values]
  12. cool_fan_enabled = True
  13. cool_fan_full_at_height = =layer_height_0 + 3 * layer_height
  14. cool_fan_speed = 50
  15. cool_fan_speed_max = 100
  16. cool_min_layer_time = 11
  17. cool_min_layer_time_fan_speed_max = 20
  18. cool_min_speed = 10
  19. material_bed_temperature = 80
  20. material_flow = 98
  21. material_print_temperature = =default_material_print_temperature + 20
  22. material_print_temperature_layer_0 = =230
  23. prime_tower_mode = normal
  24. retraction_extra_prime_amount = 0
  25. retraction_hop_only_when_collides = True
  26. retraction_min_travel = =3*line_width
  27. skin_overlap = 10
  28. speed_layer_0 = =math.ceil(speed_print * 20/50)
  29. speed_print = 50
  30. speed_slowdown_layers = 2
  31. speed_topbottom = =math.ceil(speed_print * 35/50)
  32. speed_wall = =math.ceil(speed_print * 35/50)
  33. speed_wall_0 = =math.ceil(speed_wall * 30/35)
  34. support_angle = 65
  35. support_bottom_distance = =support_z_distance*0.5
  36. support_interface_density = 100
  37. support_offset = 1
  38. support_xy_distance = =line_width * 1.7
  39. support_xy_distance_overhang = =wall_line_width_0
  40. support_z_distance = =layer_height*2