um3_aa0.8_CPEP_Fast_Print.inst.cfg 1.1 KB

1234567891011121314151617181920212223242526272829303132333435363738
  1. [general]
  2. version = 4
  3. name = Fast - Experimental
  4. definition = ultimaker3
  5. [metadata]
  6. setting_version = 5
  7. type = quality
  8. quality_type = draft
  9. weight = -2
  10. material = generic_cpe_plus
  11. variant = AA 0.8
  12. [values]
  13. brim_width = 14
  14. cool_fan_full_at_height = =layer_height_0 + 14 * layer_height
  15. infill_before_walls = True
  16. line_width = =machine_nozzle_size * 0.9375
  17. machine_nozzle_cool_down_speed = 0.9
  18. machine_nozzle_heat_up_speed = 1.4
  19. material_print_temperature = =default_material_print_temperature - 10
  20. material_print_temperature_layer_0 = =material_print_temperature
  21. material_standby_temperature = 100
  22. prime_tower_enable = True
  23. retraction_combing = off
  24. retraction_hop = 0.1
  25. retraction_hop_enabled = False
  26. skin_overlap = 0
  27. speed_layer_0 = =math.ceil(speed_print * 15 / 50)
  28. speed_print = 50
  29. speed_slowdown_layers = 15
  30. speed_topbottom = =math.ceil(speed_print * 35 / 50)
  31. speed_wall = =math.ceil(speed_print * 40 / 50)
  32. speed_wall_0 = =math.ceil(speed_wall * 35 / 40)
  33. support_bottom_distance = =support_z_distance
  34. support_line_width = =round(line_width * 0.6 / 0.7, 2)
  35. support_z_distance = =layer_height
  36. top_bottom_thickness = 1.2