um3_aa0.4_BAM_Fast_Print.inst.cfg 1.2 KB

12345678910111213141516171819202122232425262728293031323334353637
  1. [general]
  2. version = 4
  3. name = Normal
  4. definition = ultimaker3
  5. [metadata]
  6. setting_version = 5
  7. type = quality
  8. quality_type = fast
  9. weight = -1
  10. material = generic_bam
  11. variant = AA 0.4
  12. [values]
  13. cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
  14. cool_fan_speed_max = =cool_fan_speed
  15. machine_nozzle_cool_down_speed = 0.75
  16. machine_nozzle_heat_up_speed = 1.6
  17. # prime_tower_enable: see CURA-4248
  18. prime_tower_enable = =min(extruderValues('material_surface_energy')) < 100
  19. speed_print = 80
  20. speed_layer_0 = =math.ceil(speed_print * 20 / 80)
  21. speed_topbottom = =math.ceil(speed_print * 30 / 80)
  22. speed_wall = =math.ceil(speed_print * 40 / 80)
  23. speed_wall_0 = =math.ceil(speed_wall * 30 / 40)
  24. top_bottom_thickness = 1
  25. wall_thickness = 1
  26. support_interface_enable = True
  27. support_interface_density = =min(extruderValues('material_surface_energy'))
  28. support_interface_pattern = ='lines' if support_interface_density < 100 else 'concentric'
  29. support_top_distance = =math.ceil(min(extruderValues('material_adhesion_tendency')) / 1) * layer_height
  30. support_bottom_distance = =math.ceil(min(extruderValues('material_adhesion_tendency')) / 2) * layer_height
  31. support_angle = 45
  32. support_join_distance = 5
  33. support_offset = 2
  34. support_pattern = triangles
  35. support_infill_rate = 10