um3_aa0.25_PC_Normal_Quality.inst.cfg 1.4 KB

12345678910111213141516171819202122232425262728293031323334353637383940414243444546474849505152535455
  1. [general]
  2. version = 4
  3. name = Fine - Experimental
  4. definition = ultimaker3
  5. [metadata]
  6. setting_version = 5
  7. type = quality
  8. quality_type = normal
  9. weight = 0
  10. material = generic_pc
  11. variant = AA 0.25
  12. [values]
  13. acceleration_enabled = True
  14. acceleration_print = 4000
  15. adhesion_type = brim
  16. brim_width = 20
  17. cool_fan_full_at_height = =layer_height_0 + layer_height
  18. cool_fan_speed_max = 50
  19. cool_min_layer_time_fan_speed_max = 5
  20. cool_min_speed = 5
  21. infill_line_width = =line_width
  22. infill_pattern = triangles
  23. infill_wipe_dist = 0.1
  24. jerk_enabled = True
  25. jerk_print = 25
  26. machine_min_cool_heat_time_window = 15
  27. multiple_mesh_overlap = 0
  28. ooze_shield_angle = 40
  29. prime_tower_enable = True
  30. prime_tower_wipe_enabled = True
  31. raft_airgap = 0.25
  32. raft_interface_thickness = =max(layer_height * 1.5, 0.225)
  33. retraction_count_max = 80
  34. retraction_hop = 2
  35. retraction_hop_only_when_collides = True
  36. retraction_min_travel = 0.8
  37. retraction_prime_speed = 15
  38. skin_overlap = 30
  39. speed_layer_0 = =math.ceil(speed_print * 25 / 50)
  40. speed_print = 50
  41. speed_topbottom = =math.ceil(speed_print * 25 / 50)
  42. speed_travel = 250
  43. speed_wall = =math.ceil(speed_print * 40 / 50)
  44. speed_wall_0 = =math.ceil(speed_wall * 25 / 40)
  45. support_bottom_distance = =support_z_distance
  46. support_interface_density = 87.5
  47. support_interface_pattern = lines
  48. switch_extruder_prime_speed = 15
  49. switch_extruder_retraction_amount = 20
  50. switch_extruder_retraction_speeds = 35
  51. wall_0_inset = 0
  52. wall_line_width_x = =line_width
  53. wall_thickness = 1.2