| .. |
|
arjun
|
c64dcb785c
Remove 'support_interface_skip_height' setting.
|
1 год назад |
|
artillery
|
28d6e993df
Bump up setting version to 22
|
1 год назад |
|
atmat
|
28d6e993df
Bump up setting version to 22
|
1 год назад |
|
biqu
|
28d6e993df
Bump up setting version to 22
|
1 год назад |
|
blocks
|
28d6e993df
Bump up setting version to 22
|
1 год назад |
|
cartesio
|
28d6e993df
Bump up setting version to 22
|
1 год назад |
|
crazy3dprint
|
28d6e993df
Bump up setting version to 22
|
1 год назад |
|
creality
|
9efef84e5c
Applied printer-linter format
|
10 месяцев назад |
|
dagoma
|
87e119789c
Applied printer-linter format
|
10 месяцев назад |
|
deltacomb
|
28d6e993df
Bump up setting version to 22
|
1 год назад |
|
diy
|
28d6e993df
Bump up setting version to 22
|
1 год назад |
|
dxu
|
28d6e993df
Bump up setting version to 22
|
1 год назад |
|
elegoo
|
94f14b53f8
EN4 add Neptune 4 Plus and Max variants
|
1 год назад |
|
fabtotum
|
28d6e993df
Bump up setting version to 22
|
1 год назад |
|
farm2
|
28d6e993df
Bump up setting version to 22
|
1 год назад |
|
felix
|
28d6e993df
Bump up setting version to 22
|
1 год назад |
|
flashforge
|
3793d4acbe
Applied printer-linter format
|
11 месяцев назад |
|
flyingbear
|
1a9e82da86
Applied printer-linter format
|
1 год назад |
|
fusion3
|
28d6e993df
Bump up setting version to 22
|
1 год назад |
|
geeetech_variants
|
28d6e993df
Bump up setting version to 22
|
1 год назад |
|
gmax
|
28d6e993df
Bump up setting version to 22
|
1 год назад |
|
goofoo
|
28d6e993df
Bump up setting version to 22
|
1 год назад |
|
hms434
|
28d6e993df
Bump up setting version to 22
|
1 год назад |
|
imade3d
|
28d6e993df
Bump up setting version to 22
|
1 год назад |
|
kingroon
|
9b140a7e67
Added missing extruder variants
|
1 год назад |
|
kosher
|
c64dcb785c
Remove 'support_interface_skip_height' setting.
|
1 год назад |
|
leapfrog
|
28d6e993df
Bump up setting version to 22
|
1 год назад |
|
liquid
|
501b15753d
Revert "Change prime_tower_enable to prime_tower_mode in all defs/profiles"
|
10 месяцев назад |
|
lnl3d
|
28d6e993df
Bump up setting version to 22
|
1 год назад |
|
longer
|
d7d32b07ae
Bump-up settings version to 22
|
1 год назад |
|
mark2
|
28d6e993df
Bump up setting version to 22
|
1 год назад |
|
mingda
|
28d6e993df
Bump up setting version to 22
|
1 год назад |
|
modix
|
28d6e993df
Bump up setting version to 22
|
1 год назад |
|
multicomp
|
ff5d0fa552
add new machine Multicomp MCPI 200
|
1 год назад |
|
nwa3d
|
28d6e993df
Bump up setting version to 22
|
1 год назад |
|
ratrig
|
d490effcbd
Applied printer-linter format
|
11 месяцев назад |
|
renkforce
|
8332a4226c
add renkforce 10+ 0.2 nozzle profile
|
1 год назад |
|
sovol
|
044651f856
Add SV06 Plus profile based on Sovol profile, Update SV06 profile with updates
|
1 год назад |
|
strateo3d
|
501b15753d
Revert "Change prime_tower_enable to prime_tower_mode in all defs/profiles"
|
10 месяцев назад |
|
structur3d
|
28d6e993df
Bump up setting version to 22
|
1 год назад |
|
tizyx
|
28d6e993df
Bump up setting version to 22
|
1 год назад |
|
tronxy
|
28d6e993df
Bump up setting version to 22
|
1 год назад |
|
two_trees
|
28d6e993df
Bump up setting version to 22
|
1 год назад |
|
uni
|
28d6e993df
Bump up setting version to 22
|
1 год назад |
|
vivedino
|
28d6e993df
Bump up setting version to 22
|
1 год назад |
|
voron
|
2876a0e922
Applied printer-linter format
|
1 год назад |
|
vzbot
|
28d6e993df
Bump up setting version to 22
|
1 год назад |
|
weedo
|
28d6e993df
Bump up setting version to 22
|
1 год назад |
|
xyz_printing
|
28d6e993df
Bump up setting version to 22
|
1 год назад |
|
zav
|
28d6e993df
Bump up setting version to 22
|
1 год назад |
|
ultimaker2_extended_olsson_0.25.inst.cfg
|
28d6e993df
Bump up setting version to 22
|
1 год назад |
|
ultimaker2_extended_olsson_0.4.inst.cfg
|
28d6e993df
Bump up setting version to 22
|
1 год назад |
|
ultimaker2_extended_olsson_0.6.inst.cfg
|
28d6e993df
Bump up setting version to 22
|
1 год назад |
|
ultimaker2_extended_olsson_0.8.inst.cfg
|
28d6e993df
Bump up setting version to 22
|
1 год назад |
|
ultimaker2_extended_plus_0.25.inst.cfg
|
28d6e993df
Bump up setting version to 22
|
1 год назад |
|
ultimaker2_extended_plus_0.4.inst.cfg
|
28d6e993df
Bump up setting version to 22
|
1 год назад |
|
ultimaker2_extended_plus_0.6.inst.cfg
|
28d6e993df
Bump up setting version to 22
|
1 год назад |
|
ultimaker2_extended_plus_0.8.inst.cfg
|
28d6e993df
Bump up setting version to 22
|
1 год назад |
|
ultimaker2_olsson_0.25.inst.cfg
|
28d6e993df
Bump up setting version to 22
|
1 год назад |
|
ultimaker2_olsson_0.4.inst.cfg
|
28d6e993df
Bump up setting version to 22
|
1 год назад |
|
ultimaker2_olsson_0.6.inst.cfg
|
28d6e993df
Bump up setting version to 22
|
1 год назад |
|
ultimaker2_olsson_0.8.inst.cfg
|
28d6e993df
Bump up setting version to 22
|
1 год назад |
|
ultimaker2_plus_0.25.inst.cfg
|
28d6e993df
Bump up setting version to 22
|
1 год назад |
|
ultimaker2_plus_0.4.inst.cfg
|
28d6e993df
Bump up setting version to 22
|
1 год назад |
|
ultimaker2_plus_0.6.inst.cfg
|
28d6e993df
Bump up setting version to 22
|
1 год назад |
|
ultimaker2_plus_0.8.inst.cfg
|
28d6e993df
Bump up setting version to 22
|
1 год назад |
|
ultimaker2_plus_connect_0.25.inst.cfg
|
28d6e993df
Bump up setting version to 22
|
1 год назад |
|
ultimaker2_plus_connect_0.4.inst.cfg
|
28d6e993df
Bump up setting version to 22
|
1 год назад |
|
ultimaker2_plus_connect_0.6.inst.cfg
|
28d6e993df
Bump up setting version to 22
|
1 год назад |
|
ultimaker2_plus_connect_0.8.inst.cfg
|
28d6e993df
Bump up setting version to 22
|
1 год назад |
|
ultimaker3_aa0.25.inst.cfg
|
28d6e993df
Bump up setting version to 22
|
1 год назад |
|
ultimaker3_aa0.8.inst.cfg
|
501b15753d
Revert "Change prime_tower_enable to prime_tower_mode in all defs/profiles"
|
10 месяцев назад |
|
ultimaker3_aa04.inst.cfg
|
28d6e993df
Bump up setting version to 22
|
1 год назад |
|
ultimaker3_bb0.8.inst.cfg
|
501b15753d
Revert "Change prime_tower_enable to prime_tower_mode in all defs/profiles"
|
10 месяцев назад |
|
ultimaker3_bb04.inst.cfg
|
3b716d08b2
Removed the reduced print speed for the bottom interface layers of the BB cores (effectively for PVA).
|
1 год назад |
|
ultimaker3_extended_aa0.25.inst.cfg
|
28d6e993df
Bump up setting version to 22
|
1 год назад |
|
ultimaker3_extended_aa0.8.inst.cfg
|
501b15753d
Revert "Change prime_tower_enable to prime_tower_mode in all defs/profiles"
|
10 месяцев назад |
|
ultimaker3_extended_aa04.inst.cfg
|
28d6e993df
Bump up setting version to 22
|
1 год назад |
|
ultimaker3_extended_bb0.8.inst.cfg
|
501b15753d
Revert "Change prime_tower_enable to prime_tower_mode in all defs/profiles"
|
10 месяцев назад |
|
ultimaker3_extended_bb04.inst.cfg
|
3b716d08b2
Removed the reduced print speed for the bottom interface layers of the BB cores (effectively for PVA).
|
1 год назад |
|
ultimaker_methodx_1C.inst.cfg
|
7e0d633106
Applied printer-linter format
|
1 год назад |
|
ultimaker_methodx_1XA.inst.cfg
|
7e0d633106
Applied printer-linter format
|
1 год назад |
|
ultimaker_methodx_2XA.inst.cfg
|
7e0d633106
Applied printer-linter format
|
1 год назад |
|
ultimaker_methodx_LABS.inst.cfg
|
7e0d633106
Applied printer-linter format
|
1 год назад |
|
ultimaker_methodxl_1C.inst.cfg
|
7e0d633106
Applied printer-linter format
|
1 год назад |
|
ultimaker_methodxl_1XA.inst.cfg
|
7e0d633106
Applied printer-linter format
|
1 год назад |
|
ultimaker_methodxl_2XA.inst.cfg
|
7e0d633106
Applied printer-linter format
|
1 год назад |
|
ultimaker_methodxl_LABS.inst.cfg
|
7e0d633106
Applied printer-linter format
|
1 год назад |
|
ultimaker_s3_aa0.25.inst.cfg
|
2d82bb94ab
Set retraction_min_travel to 5mm for all S-line and Method machines. This improves the infill pattern wall overlaps (for TPU top surfaces and raft base layers) and reduces the amount of retracts in tree supports islands.
|
11 месяцев назад |
|
ultimaker_s3_aa0.8.inst.cfg
|
501b15753d
Revert "Change prime_tower_enable to prime_tower_mode in all defs/profiles"
|
10 месяцев назад |
|
ultimaker_s3_aa04.inst.cfg
|
2d82bb94ab
Set retraction_min_travel to 5mm for all S-line and Method machines. This improves the infill pattern wall overlaps (for TPU top surfaces and raft base layers) and reduces the amount of retracts in tree supports islands.
|
11 месяцев назад |
|
ultimaker_s3_bb0.8.inst.cfg
|
501b15753d
Revert "Change prime_tower_enable to prime_tower_mode in all defs/profiles"
|
10 месяцев назад |
|
ultimaker_s3_bb04.inst.cfg
|
2d82bb94ab
Set retraction_min_travel to 5mm for all S-line and Method machines. This improves the infill pattern wall overlaps (for TPU top surfaces and raft base layers) and reduces the amount of retracts in tree supports islands.
|
11 месяцев назад |
|
ultimaker_s3_cc04.inst.cfg
|
2d82bb94ab
Set retraction_min_travel to 5mm for all S-line and Method machines. This improves the infill pattern wall overlaps (for TPU top surfaces and raft base layers) and reduces the amount of retracts in tree supports islands.
|
11 месяцев назад |
|
ultimaker_s3_cc06.inst.cfg
|
2d82bb94ab
Set retraction_min_travel to 5mm for all S-line and Method machines. This improves the infill pattern wall overlaps (for TPU top surfaces and raft base layers) and reduces the amount of retracts in tree supports islands.
|
11 месяцев назад |
|
ultimaker_s3_dd04.inst.cfg
|
28d6e993df
Bump up setting version to 22
|
1 год назад |
|
ultimaker_s5_aa0.25.inst.cfg
|
2d82bb94ab
Set retraction_min_travel to 5mm for all S-line and Method machines. This improves the infill pattern wall overlaps (for TPU top surfaces and raft base layers) and reduces the amount of retracts in tree supports islands.
|
11 месяцев назад |
|
ultimaker_s5_aa0.8.inst.cfg
|
501b15753d
Revert "Change prime_tower_enable to prime_tower_mode in all defs/profiles"
|
10 месяцев назад |
|
ultimaker_s5_aa04.inst.cfg
|
2d82bb94ab
Set retraction_min_travel to 5mm for all S-line and Method machines. This improves the infill pattern wall overlaps (for TPU top surfaces and raft base layers) and reduces the amount of retracts in tree supports islands.
|
11 месяцев назад |
|
ultimaker_s5_aluminum.inst.cfg
|
28d6e993df
Bump up setting version to 22
|
1 год назад |
|
ultimaker_s5_bb0.8.inst.cfg
|
501b15753d
Revert "Change prime_tower_enable to prime_tower_mode in all defs/profiles"
|
10 месяцев назад |
|
ultimaker_s5_bb04.inst.cfg
|
2d82bb94ab
Set retraction_min_travel to 5mm for all S-line and Method machines. This improves the infill pattern wall overlaps (for TPU top surfaces and raft base layers) and reduces the amount of retracts in tree supports islands.
|
11 месяцев назад |
|
ultimaker_s5_cc04.inst.cfg
|
2d82bb94ab
Set retraction_min_travel to 5mm for all S-line and Method machines. This improves the infill pattern wall overlaps (for TPU top surfaces and raft base layers) and reduces the amount of retracts in tree supports islands.
|
11 месяцев назад |
|
ultimaker_s5_cc06.inst.cfg
|
2d82bb94ab
Set retraction_min_travel to 5mm for all S-line and Method machines. This improves the infill pattern wall overlaps (for TPU top surfaces and raft base layers) and reduces the amount of retracts in tree supports islands.
|
11 месяцев назад |
|
ultimaker_s5_dd04.inst.cfg
|
28d6e993df
Bump up setting version to 22
|
1 год назад |
|
ultimaker_s5_glass.inst.cfg
|
28d6e993df
Bump up setting version to 22
|
1 год назад |
|
ultimaker_s7_aa0.25.inst.cfg
|
2d82bb94ab
Set retraction_min_travel to 5mm for all S-line and Method machines. This improves the infill pattern wall overlaps (for TPU top surfaces and raft base layers) and reduces the amount of retracts in tree supports islands.
|
11 месяцев назад |
|
ultimaker_s7_aa0.8.inst.cfg
|
501b15753d
Revert "Change prime_tower_enable to prime_tower_mode in all defs/profiles"
|
10 месяцев назад |
|
ultimaker_s7_aa04.inst.cfg
|
2d82bb94ab
Set retraction_min_travel to 5mm for all S-line and Method machines. This improves the infill pattern wall overlaps (for TPU top surfaces and raft base layers) and reduces the amount of retracts in tree supports islands.
|
11 месяцев назад |
|
ultimaker_s7_bb0.8.inst.cfg
|
501b15753d
Revert "Change prime_tower_enable to prime_tower_mode in all defs/profiles"
|
10 месяцев назад |
|
ultimaker_s7_bb04.inst.cfg
|
2d82bb94ab
Set retraction_min_travel to 5mm for all S-line and Method machines. This improves the infill pattern wall overlaps (for TPU top surfaces and raft base layers) and reduces the amount of retracts in tree supports islands.
|
11 месяцев назад |
|
ultimaker_s7_cc04.inst.cfg
|
2d82bb94ab
Set retraction_min_travel to 5mm for all S-line and Method machines. This improves the infill pattern wall overlaps (for TPU top surfaces and raft base layers) and reduces the amount of retracts in tree supports islands.
|
11 месяцев назад |
|
ultimaker_s7_cc06.inst.cfg
|
2d82bb94ab
Set retraction_min_travel to 5mm for all S-line and Method machines. This improves the infill pattern wall overlaps (for TPU top surfaces and raft base layers) and reduces the amount of retracts in tree supports islands.
|
11 месяцев назад |
|
ultimaker_s7_dd04.inst.cfg
|
28d6e993df
Bump up setting version to 22
|
1 год назад |
wawanbreton