um_s3_aa0.4_tpu_0.1mm.inst.cfg 1.6 KB

1234567891011121314151617181920212223242526272829303132333435363738394041424344454647484950515253
  1. [general]
  2. definition = ultimaker_s3
  3. name = Fine
  4. version = 4
  5. [metadata]
  6. material = generic_tpu
  7. quality_type = normal
  8. setting_version = 23
  9. type = quality
  10. variant = AA 0.4
  11. weight = 0
  12. [values]
  13. bridge_skin_material_flow = 200
  14. bridge_skin_speed = =bridge_wall_speed
  15. bridge_sparse_infill_max_density = 50
  16. bridge_wall_material_flow = =bridge_skin_material_flow
  17. bridge_wall_speed = 10
  18. brim_width = 8.75
  19. gradual_infill_step_height = =5 * layer_height
  20. infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'cross_3d'
  21. infill_sparse_density = 10
  22. infill_wipe_dist = 0.1
  23. machine_min_cool_heat_time_window = 15
  24. machine_nozzle_cool_down_speed = 0.5
  25. machine_nozzle_heat_up_speed = 2.5
  26. material_final_print_temperature = =material_print_temperature - 10
  27. material_flow = 106
  28. material_initial_print_temperature = =material_print_temperature - 10
  29. material_print_temperature = =default_material_print_temperature - 2
  30. multiple_mesh_overlap = 0
  31. prime_tower_wipe_enabled = True
  32. retraction_count_max = 15
  33. retraction_extra_prime_amount = 0.8
  34. retraction_hop_only_when_collides = True
  35. skin_line_width = =round(line_width / 0.8, 2)
  36. speed_print = 25
  37. speed_topbottom = =math.ceil(speed_print * 0.8)
  38. speed_wall = =math.ceil(speed_print * 25 / 25)
  39. speed_wall_0 = =math.ceil(speed_wall * 25 / 25)
  40. support_angle = 50
  41. support_bottom_distance = =support_z_distance
  42. support_interface_enable = True
  43. support_top_distance = =support_z_distance
  44. support_z_distance = =math.ceil(0.3/layer_height)*layer_height
  45. switch_extruder_prime_speed = 15
  46. switch_extruder_retraction_amount = 20
  47. switch_extruder_retraction_speeds = 35
  48. top_bottom_thickness = =layer_height * 6
  49. travel_avoid_distance = 1.5
  50. wall_0_inset = 0