um_s3_aa0.4_pc_0.2mm.inst.cfg 1.1 KB

1234567891011121314151617181920212223242526272829303132333435363738394041
  1. [general]
  2. definition = ultimaker_s3
  3. name = Fast
  4. version = 4
  5. [metadata]
  6. material = generic_pc
  7. quality_type = draft
  8. setting_version = 23
  9. type = quality
  10. variant = AA 0.4
  11. weight = -2
  12. [values]
  13. brim_width = 20
  14. infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles'
  15. infill_wipe_dist = 0.1
  16. machine_min_cool_heat_time_window = 15
  17. machine_nozzle_cool_down_speed = 0.85
  18. machine_nozzle_heat_up_speed = 1.5
  19. multiple_mesh_overlap = 0
  20. ooze_shield_angle = 40
  21. prime_tower_enable = True
  22. prime_tower_wipe_enabled = True
  23. raft_airgap = 0.25
  24. retraction_hop = 2
  25. retraction_hop_only_when_collides = True
  26. speed_print = 50
  27. speed_topbottom = =math.ceil(speed_print * 25 / 50)
  28. speed_wall = =math.ceil(speed_print * 40 / 50)
  29. speed_wall_0 = =math.ceil(speed_wall * 25 / 40)
  30. support_bottom_distance = =support_z_distance
  31. support_interface_density = 87.5
  32. support_interface_enable = True
  33. support_top_distance = =support_z_distance
  34. support_z_distance = =math.ceil(0.3/layer_height)*layer_height
  35. switch_extruder_prime_speed = 15
  36. switch_extruder_retraction_amount = 20
  37. switch_extruder_retraction_speeds = 35
  38. wall_0_inset = 0