s3d_ht0.4_PLA_HT_A.inst.cfg 1.8 KB

1234567891011121314151617181920212223242526272829303132333435363738394041424344454647484950515253545556
  1. [general]
  2. definition = strateo3d
  3. name = A
  4. version = 4
  5. [metadata]
  6. material = emotiontech_pla_hr_870
  7. quality_type = a
  8. setting_version = 23
  9. type = quality
  10. variant = High temp 0.4
  11. weight = 1
  12. [values]
  13. cool_fan_enabled = True
  14. cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
  15. cool_fan_speed = 100
  16. cool_fan_speed_max = 100
  17. cool_lift_head = True
  18. cool_min_layer_time = 2
  19. cool_min_layer_time_fan_speed_max = 20
  20. cool_min_speed = 4
  21. layer_height_0 = =round(0.5*machine_nozzle_size, 2)
  22. line_width = =machine_nozzle_size/machine_nozzle_size*0.4
  23. material_final_print_temperature = =default_material_print_temperature + 5
  24. material_flow = 91
  25. material_initial_print_temperature = =default_material_print_temperature + 5
  26. material_print_temperature = =default_material_print_temperature + 5
  27. material_print_temperature_layer_0 = =default_material_print_temperature + 10
  28. meshfix_maximum_deviation = 0.04
  29. meshfix_maximum_resolution = 0.5
  30. prime_tower_enable = True
  31. retraction_amount = 2
  32. retraction_extra_prime_amount = 0.1
  33. retraction_hop_only_when_collides = True
  34. retraction_min_travel = =3*line_width
  35. skin_material_flow = 92
  36. skin_overlap = 10
  37. speed_layer_0 = =math.ceil(speed_print * 20/50)
  38. speed_print = 30
  39. speed_slowdown_layers = 2
  40. speed_topbottom = =math.ceil(speed_print * 35/50)
  41. speed_wall = =math.ceil(speed_print * 35/50)
  42. speed_wall_0 = =math.ceil(speed_wall * 30/35)
  43. support_angle = 65
  44. support_bottom_distance = =support_z_distance*0.5
  45. support_interface_density = 100
  46. support_offset = 1
  47. support_xy_distance = =line_width * 1.7
  48. support_xy_distance_overhang = =wall_line_width_0
  49. support_z_distance = =layer_height*2
  50. wall_0_wipe_dist = =machine_nozzle_size/2
  51. wall_line_count = 3
  52. wall_line_width = =machine_nozzle_size/machine_nozzle_size*0.35
  53. wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.3