s3d_ht0.4_PLA_C.inst.cfg 1.5 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748
  1. [general]
  2. definition = strateo3d
  3. name = C
  4. version = 4
  5. [metadata]
  6. material = emotiontech_pla
  7. quality_type = c
  8. setting_version = 23
  9. type = quality
  10. variant = High temp 0.4
  11. weight = -1
  12. [values]
  13. cool_fan_enabled = True
  14. cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
  15. cool_fan_speed = 100
  16. cool_fan_speed_max = 100
  17. cool_min_layer_time = 11
  18. cool_min_layer_time_fan_speed_max = 20
  19. cool_min_speed = 10
  20. layer_height_0 = =round(0.75*machine_nozzle_size, 2)
  21. line_width = =machine_nozzle_size/machine_nozzle_size*0.4
  22. material_flow = 91
  23. material_print_temperature = =default_material_print_temperature + 10
  24. material_print_temperature_layer_0 = =default_material_print_temperature + 5
  25. prime_tower_enable = True
  26. retraction_extra_prime_amount = 0.1
  27. retraction_hop_only_when_collides = True
  28. retraction_min_travel = =3*line_width
  29. skin_overlap = 20
  30. speed_layer_0 = =math.ceil(speed_print * 30/60)
  31. speed_print = 60
  32. speed_slowdown_layers = 2
  33. speed_topbottom = =math.ceil(speed_print * 40/60)
  34. speed_wall = =math.ceil(speed_print * 40/60)
  35. speed_wall_0 = =math.ceil(speed_wall * 35/40)
  36. support_angle = 55
  37. support_bottom_distance = =support_z_distance*0.5
  38. support_interface_density = 100
  39. support_offset = 1
  40. support_xy_distance = =line_width * 1.7
  41. support_xy_distance_overhang = =wall_line_width_0
  42. support_z_distance = =layer_height*2
  43. wall_0_wipe_dist = =machine_nozzle_size/2
  44. wall_line_width = =machine_nozzle_size/machine_nozzle_size*0.35
  45. wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.3