nps_PC_A.inst.cfg 1.4 KB

12345678910111213141516171819202122232425262728293031323334353637383940414243444546474849505152535455
  1. [general]
  2. definition = nps
  3. name = A
  4. version = 4
  5. [metadata]
  6. material = generic_pc
  7. quality_type = a
  8. setting_version = 23
  9. type = quality
  10. weight = 1
  11. [values]
  12. adhesion_type = brim
  13. bridge_fan_speed = 100
  14. bridge_settings_enabled = True
  15. bridge_skin_density = 80
  16. bridge_skin_material_flow = 100
  17. bridge_skin_speed = 12.5
  18. bridge_wall_coast = 50
  19. bridge_wall_material_flow = 50
  20. bridge_wall_speed = 12
  21. cool_fan_enabled = True
  22. cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
  23. cool_fan_speed = 10
  24. cool_fan_speed_max = 10
  25. cool_lift_head = true
  26. cool_min_layer_time = 2
  27. cool_min_layer_time_fan_speed_max = 20
  28. cool_min_speed = 12
  29. material_bed_temperature = 110
  30. material_flow = 100
  31. material_print_temperature = =default_material_print_temperature + 10
  32. material_print_temperature_layer_0 = =280
  33. prime_tower_enable = True
  34. retraction_extra_prime_amount = 0.1
  35. retraction_hop_only_when_collides = True
  36. retraction_min_travel = =3*line_width
  37. retraction_speed = 30
  38. skin_overlap = 10
  39. speed_layer_0 = =math.ceil(speed_print * 20/50)
  40. speed_print = 35
  41. speed_slowdown_layers = 2
  42. speed_topbottom = =math.ceil(speed_print * 35/50)
  43. speed_wall = =math.ceil(speed_print * 35/50)
  44. speed_wall_0 = =math.ceil(speed_wall * 30/35)
  45. support_angle = 60
  46. support_bottom_distance = =support_z_distance*0.5
  47. support_interface_density = 100
  48. support_offset = 1
  49. support_xy_distance = =line_width * 1.7
  50. support_xy_distance_overhang = =wall_line_width_0
  51. support_z_distance = =layer_height
  52. wall_line_count = 3