gutenberg_global_fine_quality.inst.cfg 1.2 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657
  1. [general]
  2. definition = gutenberg_base
  3. name = Fine
  4. version = 4
  5. [metadata]
  6. global_quality = True
  7. quality_type = fine
  8. setting_version = 23
  9. type = quality
  10. [values]
  11. acceleration_enabled = True
  12. acceleration_print = 15000
  13. acceleration_roofing = 10000
  14. acceleration_topbottom = 10000
  15. acceleration_travel = 15000
  16. acceleration_wall = 7500
  17. acceleration_wall_0 = 7500
  18. adhesion_type = skirt
  19. alternate_extra_perimeter = False
  20. cool_min_layer_time = 10
  21. infill_line_width = 0.5
  22. infill_pattern = gyroid
  23. infill_sparse_density = 15
  24. inset_direction = outside_in
  25. layer_height = 0.2
  26. layer_height_0 = 0.2
  27. optimize_wall_printing_order = True
  28. retraction_amount = 0.8
  29. retraction_combing = noskin
  30. retraction_hop = 0.2
  31. retraction_hop_enabled = True
  32. retraction_hop_only_when_collides = True
  33. retraction_speed = 35
  34. roofing_layer_count = 1
  35. skin_monotonic = True
  36. skirt_brim_speed = 45
  37. speed_infill = 150
  38. speed_layer_0 = 45
  39. speed_print = 100
  40. speed_roofing = 100
  41. speed_topbottom = 100
  42. speed_travel = 300
  43. speed_travel_layer_0 = 60
  44. speed_wall = 100
  45. speed_wall_0 = 75
  46. speed_wall_x = 100
  47. support_angle = 46
  48. support_enable = False
  49. top_bottom_thickness = 0.8
  50. travel_avoid_supports = True
  51. wall_line_width = 0.45
  52. wall_line_width_0 = 0.4
  53. wall_thickness = 1.65
  54. zig_zaggify_infill = True