Cura/resources/definitions/sovol_sv04_dual_mode.def.json

{
    "version": 2,
    "name": "Sovol SV04 Dual Mode",
    "inherits": "sovol_base",
    "metadata":
    {
        "visible": true,
        "author": "Sovol",
        "has_machine_quality": false,
        "has_variants": false,
        "machine_extruder_trains":
        {
            "0": "sovol_sv04_dual_mode_extruder_0",
            "1": "sovol_sv04_dual_mode_extruder_1"
        },
        "preferred_quality_type": "draft"
    },
    "overrides":
    {
        "machine_depth": { "default_value": 302 },
        "machine_end_gcode": { "default_value": ";SV04 end\nG91 ;Relative positioning\nG1 E-2 F2700 ;Retract a bit\nG1 E-2 Z0.2 F2400 ;Retract and raise Z\nG1 X0 Y240 F3000 ;Wipe out\nG1 Z10 ;Raise Z more\nG90 ;Absolute positionning\nG1 X0 Y{machine_depth} ;Present print\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\nM84 X Y E ;Disable all steppers but Z" },
        "machine_extruder_count": { "default_value": 2 },
        "machine_height": { "default_value": 402 },
        "machine_name": { "default_value": "SV04 Dual Mode" },
        "machine_start_gcode": { "default_value": ";SV04 start\nM140 S{material_bed_temperature};\nM104 S{material_print_temperature};\nM280 P0 S160;\nG4 P100;\nG28;\nM420 S1;\nM190 S{material_bed_temperature};\nM109 S{material_print_temperature};\nG92 E0;\nG1 X10.1 Y20 Z0.28 F5000.0;\nG1 X10.1 Y200.0 Z0.28 F1500.0 E15;\nG1 X10.4 Y200.0 Z0.28 F5000.0;\nG1 X10.4 Y20 Z0.28 F1500.0 E30;\nG92 E0 ;Reset Extruder\nG1 Z2.0 F3000;" },
        "machine_width": { "default_value": 302 }
    }
}