Cura/resources/definitions/rigid3d_zero.def.json

{
    "version": 2,
    "name": "Rigid3D Zero",
    "inherits": "rigid3d_base",
    "metadata":
    {
        "visible": true,
        "preferred_material": "generic_pla_175",
        "preferred_quality_type": "standard",
        "quality_definition": "rigid3d_base"
    },
    "overrides":
    {
        "gantry_height": { "value": 20 },
        "machine_center_is_zero": { "default_value": false },
        "machine_depth": { "default_value": 250 },
        "machine_end_gcode": { "default_value": "  ; -- END GCODE --\n  G1 X0 Y230 ; Get extruder out of way.\n  M107 ; Turn off fan\n  G91 ; Relative positioning\n  G0 Z20 ; Lift extruder up\n  T0\n  G1 E-1 ; Reduce filament pressure\n  M104 T0 S0 ; Turn ectruder heater off\n  G90 ; Absolute positioning\n  G92 E0 ; Reset extruder position\n  M140 S0 ; Disable heated bed\n  M84 ; Turn steppers off\n  ; -- end of END GCODE --\n" },
        "machine_head_with_fans_polygon":
        {
            "default_value": [
                [-40, -15],
                [-40, 60],
                [30, -15],
                [30, 60]
            ]
        },
        "machine_heated_bed": { "default_value": false },
        "machine_height": { "default_value": 190 },
        "machine_name": { "default_value": "Rigid3D Zero" },
        "machine_start_gcode": { "default_value": "  ; -- START GCODE --\n  G21\n  G28 ; Home extruder\n  G29 ; Autolevel bed\n  M107 ; Turn off fan\n  G90 ; Absolute positioning\n  M82 ; Extruder in absolute mode\n  G92 E0 ; Reset extruder position\n  ; -- end of START GCODE --\n\n" },
        "machine_width": { "default_value": 250 }
    }
}