Cura/resources/quality/ultimaker_s3/um_s3_aa0.4_tough-pla_0.2mm.inst.cfg

[general]
definition = ultimaker_s3
name = Fast
version = 4

[metadata]
material = generic_tough_pla
quality_type = draft
setting_version = 22
type = quality
variant = AA 0.4
weight = -2

[values]
machine_nozzle_cool_down_speed = 0.75
machine_nozzle_heat_up_speed = 1.6
material_print_temperature = =default_material_print_temperature - 10
prime_tower_enable = False
retraction_prime_speed = =retraction_speed
speed_print = 50
speed_roofing = =math.ceil(speed_wall * 20 / 24)
speed_topbottom = =math.ceil(speed_print * 25 / 50)
speed_wall = =math.ceil(speed_print * 36 / 50)
speed_wall_0 = =math.ceil(speed_print * 26 / 50)
top_bottom_thickness = 1.2