Cura/resources/quality/ultimaker_s3/um_s3_aa0.4_cpe-plus_0.06mm.inst.cfg

[general]
definition = ultimaker_s3
name = Extra Fine
version = 4

[metadata]
material = generic_cpe_plus
quality_type = high
setting_version = 22
type = quality
variant = AA 0.4
weight = 1

[values]
infill_wipe_dist = 0
machine_min_cool_heat_time_window = 15
machine_nozzle_cool_down_speed = 0.85
machine_nozzle_heat_up_speed = 1.5
material_print_temperature = =default_material_print_temperature + 2
multiple_mesh_overlap = 0
prime_tower_enable = True
prime_tower_wipe_enabled = True
retraction_hop = 0.2
retraction_hop_enabled = False
retraction_hop_only_when_collides = True
retraction_prime_speed = =retraction_speed
speed_print = 40
speed_topbottom = =math.ceil(speed_print * 30 / 35)
speed_wall = =math.ceil(speed_print * 35 / 40)
speed_wall_0 = =math.ceil(speed_wall * 30 / 35)
support_z_distance = =layer_height
wall_0_inset = 0